Datasheet

ManualsBrandsRecom ManualsBoard Mounted DC / DC ConvertersDC/DC Converter 1W 15V 66mA

www.recom-power.com

REV.: 5/2019 ECO-1

Features

Unregulated

Converters

• Low cost 1W converter

• Industry standard pinout

• SIP4 package

• 1kVDC isolation

• Efﬁciency up to 80%

• Wide operating temperature range -40°C to +85°C

• UL60950-1 and CAN/CSA C22.2 No. 60950-1-07 certiﬁed

ROE

Description

The ROE DC/DC converters are typically used in general purpose power isolation and voltage

matching applications, and feature a full industrial operating temperature range of -40°C to +85°C

without derating.

DC/DC Converter

1 Watt

SIP4

Single Output

E358085

UL60950-1 certiﬁed

CAN/CSA C22.2 No. 60950-1-07 certiﬁed

EN60950-1 certiﬁed

IEC60950-1 certiﬁed

EN55032 compliant

Selection Guide

Part nom. Input Output Output Efﬁciency max. Capacitive

Number Voltage Voltage Current typ. Load

(1)

[VDC] [VDC] [mA] [%] [µF]

ROE-3.305S 3.3 5 200 79 470

ROE-0505S 5 5 200 79 470

ROE-0512S 5 12 84 80 220

ROE-0515S 5 15 66 80 220

ROE-1205S 12 5 200 80 470

ROE-1505S 15 5 200 79 470

ROE-2405S 24 5 200 80 470

Notes:

Note1: Max. capacitive load is tested at nominal input voltage and full load

Model Numbering

Ordering Examples:

ROE-0512S = 5VDC Input Voltage, 12VDC Output Voltage, Single Output

ROE-2405S = 24VDC Input Voltage, 5VDC Output Voltage, Single Output

lnput Voltage

Sinlge Output

Output Voltage

ROE-__ __ S

Summary of content (5 pages)

PAGE 1
Features • • • • • • • Unregulated Converters Low cost 1W converter Industry standard pinout SIP4 package 1kVDC isolation Efficiency up to 80% Wide operating temperature range -40°C to +85°C UL60950-1 and CAN/CSA C22.2 No. 60950-1-07 certified Description The ROE DC/DC converters are typically used in general purpose power isolation and voltage matching applications, and feature a full industrial operating temperature range of -40°C to +85°C without derating.
PAGE 2
ROE DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Input Voltage Range Max. ±10% Operating Frequency Range Output Ripple and Noise (2) 50kHz 20MHz BW 80kHz 105kHz 50mVp-p 100mVp-p Notes: Note2: Measurements are made with a 100nF MLCC across output (low ESR) ROE-05xxS ROE-xx05S 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] Efficiency vs.
PAGE 3
ROE DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) PROTECTIONS Parameter Isolation Voltage Condition I/P to O/P (3) Value tested for 1 second 1kVDC Isolation Capacitance 75pF max. Isolation Resistance 1GΩ min. Notes: Note3: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note4: An input fuse is required if the mains supply is not over-current protected.
PAGE 4
ROE DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) EMC Filter Suggestion according to EN55032 C2 L1 +Vin +Vin +Vout -Vin -Vout +Vout C1 -Vin -Vout C3 Component List Class A MODEL C1 Component List Class B L1 C2 (safety) C3 (safety) ROE-0505S 6.8µF, MLCC N/A ROE-0515S 4.
PAGE 5
ROE DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 520.0 x 16.0 x 9.0mm Packaging Quantity 42 pcs Storage Temperature Range -55°C to +125°C The product information and specifications may be subject to changes even without prior written notice.