Datasheet

ManualsBrandsRecom ManualsBoard Mounted DC / DC ConvertersDC/DC Converter 6W 12V 250mA

DC/DC Converter

www.recom-power.com

REV.: 1/2019 MED-1

REM6E

Features

Regulated

Converter

• 2MOPP, 250VAC working voltage isolation

• Clearance and creepage distance >8mm

• Up to 10kVDC reinforced insulation

• IEC/EN/UL 60601 certiﬁed with CB Report

(3rd Ed. Safety, 4th Ed. EMC)

• -40°C to +75°C operation, no derating

• 2:1 wide input range

Description

The REM6E series of medical grade regulated DC/DC converters feature reinforced 250VAC

continuous working isolation with >8mm creepage/clearance. The compact DIP24/SMD package offers

industry standard pinouts with tightly regulated single/dual outputs and UVLO, SCP, OCP and OVP.

The operating ambient temperature range is from -40°C to +75°C without derating. The converters

are UL marked and certiﬁed to CB, IEC, EN and ANSI/AAMI 60601 3rd. Ed. Safety and 4th Ed. EMC

medical standards. The low 1μA leakage current complies with medical applied part B, BF and CF limits

as deﬁned by IEC60601-1.

6 Watt

2:1 Input

DIP24 or SMD

Single & Dual

Output

2MOPP

250VAC

E314885

Selection Guide

Part nom. Input Output Output Efﬁciency Max. Capacitive

Number Voltage Voltage Current typ.

(1)

Load

(2)

[VDC] [VDC] [mA] [%] [µF]

REM6E-xx09S/R

(3)

(4,5)

12 / 24 / 48 9 667 81 / 82 / 83 2200

REM6E-xx12S/R

(3)

(4,5)

12 / 24 / 48 12 500 82 / 83 / 84 2200

REM6E-xx15S/R

(3)

(4,5)

12 / 24 / 48 15 400 83 / 84 / 84 2200

REM6E-xx24S/R

(3)

(4,5)

12 / 24 / 48 24 250 83 / 84 / 85 1000

REM6E-xx09D/R

(3)

(4,5)

12 / 24 / 48 ±9 ±335 81 / 82 / 83 ±2200

REM6E-xx12D/R

(3)

(4,5)

12 / 24 / 48 ±12 ±250 82 / 83 / 84 ±2200

REM6E-xx15D/R

(3)

(4,5)

12 / 24 / 48 ±15 ±200 83 / 84 / 84 ±2200

Notes:

Note1: Efﬁciency is tested at nominal input and full load at +25°C ambient

Note2: Max Cap Load is tested at nominal input and full resisitive load

Model Numbering

Output Power

nom. Input Voltage

Output Voltage

Single or Dual

Output Power

nom. Input Voltage

Output Voltage

Single or Dual

UVLO Option

(5)

CTRL Option

(4)

Pinning

Isolation

(3)

UVLO Option

(5)

Case Style

Pinning

Isolation

(3)

REM6E- /R

/A / /

REM6E- /R6/A /SMD/

CAN/CSA-C22.2 No. 60601-1:14

ANSI/AAMI ES60601-1

EN60601-1 pending

IEC60601-1 pending

IEC60601-1-2 pending

EN55032 pending

Notes:

Note3: add sufﬁx „/R8“ for 8kVDC or „/R10“ for 10kVDC isolation (DIP24 only)

if SMD package is used, always add sufﬁx „/R6“ for 6kVDC isolation

Note4: add sufﬁx „/CTRL“ for ﬁtted CTRL pin (DIP24 only)

if SMD package is used do not add sufﬁx „/CTRL“, CTRL pin is always mounted

Note5: add sufﬁx „/X1“ for Under Voltage Lockout Option

Summary of content (8 pages)

PAGE 1
Features Regulated Converter • • • • • • 2MOPP, 250VAC working voltage isolation Clearance and creepage distance >8mm Up to 10kVDC reinforced insulation IEC/EN/UL 60601 certified with CB Report (3rd Ed. Safety, 4th Ed. EMC) -40°C to +75°C operation, no derating 2:1 wide input range Description The REM6E series of medical grade regulated DC/DC converters feature reinforced 250VAC continuous working isolation with >8mm creepage/clearance.
PAGE 2
REM6E DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Internal Input Filter 9VDC 18VDC 36VDC nom. Vin = 12VDC nom. Vin = 24VDC nom. Vin = 48VDC DC-DC ON nom. Vin= 12VDC DC-DC OFF Input Voltage Range Under Voltage Lockout (UVLO) („/X1“ version) 18VDC 16.7VDC 36VDC DC-DC ON DC-DC OFF nom. Vin = 12VDC nom. Vin = 24VDC nom. Vin = 48VDC nom. Vin = 12VDC nom. Vin = 24VDC nom.
PAGE 3
REM6E DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Efficiency vs. Output Load REM6E-1212S REM6E-2412S 90 90 80 80 70 70 Efficiency [%] 100 Efficiency [%] 100 60 50 40 30 50 40 30 9VDC 12VDC 15VDC 18VDC 20 10 0 60 0 10 20 30 40 50 60 70 80 90 18VDC 24VDC 30VDC 36VDC 20 10 0 100 0 10 20 30 40 50 60 Output Load [%] Output Load [%] REM6E-1212S REM6E-2412S 70 80 90 100 Efficiency vs.
PAGE 4
REM6E DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) REM6E-1212S REM6E-2412S 1.5 1.5 1.0 1.0 0.5 0.5 Deviation [%] Deviation [%] Deviation vs. Load 0 -0.5 -1.0 -1.5 0 -0.5 -1.0 0 10 20 30 40 50 60 70 80 90 -1.
PAGE 5
REM6E DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Derating Graph (@ Chamber and natural convection 0.
PAGE 6
REM6E DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom.
PAGE 7
REM6E DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value non-conductive black plastic, (UL94 V-0) non-conductive black plastic, (UL94 V-0) silicone, (UL94 V-0) 31.8 x 20.3 x 10.2mm 31.8 x 20.3 x 10.9mm baseplate case potting DIP24 SMD Material Dimension (LxWxH) Weight 14g typ. Dimension Drawing (mm) DIP24 embossed Logo Pin Connections Pin # 1 20.3 10.2 31.8 4.
PAGE 8
REM6E DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) PACKAGING INFORMATION Parameter Packaging Dimension (LxWxH) Packaging Quantity Type Value DIP24 SMD tube tube Storage Temperature Range 520.0 x 22.7 x 18.3mm 530.0 x 30.3 x 19.2mm 15pcs -55°C to +125°C Storage Humidity 95% RH max. The product information and specifications may be subject to changes even without prior written notice.