Datasheet

ManualsBrandsRecom ManualsBoard Mounted DC / DC ConvertersDC/DC Converter 6W 15V 200mA

6 Watt

2:1 & 4:1

DIP24

Single and Dual

Output

Features

Regulated

Converter

• Reinforced insulation for 250VAC working voltage

• Clearance and creepage distance: 8mm

• 5kVAC I/P to O/P 2MOPP isolation

• 2µA patient leakage current

• Industry standard pinout

• 2:1 and 4:1 wide input range

Description

The REM6 series of medical grade regulated DC/DC converters features reinforced 5kVAC/1 minute

isolation with low 2µA leakage and are 60601-1 3rd Ed. certiﬁed for 250VAC continuous working. The

compact DIP24 package offers tightly regulated single and dual outputs, even under no-load condi-

tions. The outputs are short circuit and overload protected. The converters are available in two different

pinning options and optionally with an external control pin for standby consumption as low as 12.5mW.

The converters are fully certiﬁed to CB, IEC/EN and ANSI/AAMI standards and carry the UL mark.

REM6

DC/DC Converter

www.recom-power.com

REV.: 11/2019 MED-1

2MOPP

250VAC

E314885

IEC/EN60601-1 certiﬁed

CSA/CAN C22.2 60601-01 certiﬁed

ANSI/AAMI ES60601-1 certiﬁed

EN55011 certiﬁed

ERP

compliant

Model Numbering

“CTRL Option

(4)

”

Pinning

(3)

Input Type

(2)

Output Power

Input Voltage

(1)

Output Voltage

Single or Dual

Notes:

Note1: for 4:1 Input Voltage Type add “W”, see Note 2.

2:1 nom. Vin 4:1 “W” nom. Vin

xx= 4.5-9 Vin = “05” xx= 9-36Vin = “24”

xx= 9-18Vin = “12” xx= 18-75Vin = “48”

xx= 18-36Vin = “24”

xx= 36-75Vin = “48”

Note2: Blank for Standard 2:1 Input Voltage Range; „W“ sufﬁx for 4:1 Input Voltage Range

Note3: „A“ sufﬁx for A pinning; „C“ sufﬁx for C pinning, for more details refer to Package Style and Pinning

Note4: „CTRL“ sufﬁx for control pin option, for A pinning only, for C pinning not available

Examples:

REM6-0512D/A = 2:1 Input, 4.5-9Vin, ±12Vout, pinout „A“, without control pin

REM6-1215S/C = 2:1 Input, 9-18Vin, 15Vout, pinout „C“, without control pin

REM6-4815SW/A/CTRL = 4:1 Input, 36-75Vin, 15Vout, pinout „A“ with control pin

REM6 -243.3SW/C = 4:1 Input, 9-36Vin, 3.3Vout, pinout „C“, without control pin

REM 6- __ __ __ __ / __ __

Selection Guide

Part nom. Input Output Output Efﬁciency Max. Capacitive

Number Voltage

(1)

Voltage Current typ. Load

[VDC] [VDC] [mA] [%] [µF]

REM6-xx3.3S/

(3,4)

5 / 12 / 24 / 48 3.3 1800 81.5 / 83.5 / 83 / 82.5 2100

REM6-xx05S/

(3,4)

5 / 12 / 24 / 48 5 1200 86 / 86 / 86 / 86.5 1500

REM6-xx12S/

(3,4)

5 / 12 / 24 / 48 12 500 86 / 89 / 89 / 88 260

REM6-xx15S/

(3,4)

5 / 12 / 24 / 48 15 400 87.5 / 88.5 / 88.5 / 88.5 210

REM6-xx24S/

(3,4)

5 / 12 / 24 / 48 24 250 87 / 88.5 / 88.5 / 88 75

REM6-xxx05D/

(3,4)

5 / 12 / 24 / 48 ±5 ±600 84 / 85 / 85 / 85 ±860

REM6-xx12D/

(3,4)

5 / 12 / 24 / 48 ±12 ±250 86.5 / 89 / 88.5 / 88 ±150

REM6-xx15D/

(3,4)

5 / 12 / 24 / 48 ±15 ±200 87.5 / 88 / 88.5 / 87 ±110

REM6-xx3.3SW/

(3,4)

24 / 48 3.3 1800 83 / 82.5 2100

REM6-xx05SW/

(3,4)

24 / 48 5 1200 86 / 86.5 1500

REM6-xx12SW/

(3,4)

24 / 48 12 500 89 / 88 260

REM6-xx15SW/

(3,4)

24 / 48 15 400 89 / 88.5 210

REM6-xx24SW/

(3,4)

24 / 48 24 250 88.5 / 88 75

REM6-xx05DW/

(3,4)

24 / 48 ±5 ±600 85 / 85 ±860

REM6-xx12DW/

(3,4)

24 / 48 ±12 ±250 88.5 / 88 ±150

REM6-xx15DW/

(3,4)

24 / 48 ±15 ±200 88.5 / 87 ±110

Summary of content (7 pages)

PAGE 1
Features • • • • • • Regulated Converter Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 2:1 and 4:1 wide input range Description The REM6 series of medical grade regulated DC/DC converters features reinforced 5kVAC/1 minute isolation with low 2µA leakage and are 60601-1 3rd Ed. certified for 250VAC continuous working.
PAGE 2
REM6 DC/DC Converter Series Specifications (measured @ Ta= 25°C, nominal input voltage, full load and after warm-up) BASIC CHARACTERISTICS Parameter Condition Absolute Maximum Input Voltage ( 3sec max.) Typ. Max. 2:1 input 16VDC 25VDC 50VDC 100VDC 4:1 input 24Vin nom. 48Vin nom. 50VDC 100VDC 2:1 input 5Vin nom. 12Vin nom. 24Vin nom. 48Vin nom. 4VDC 8VDC 16VDC 33VDC 4.5VDC 9VDC 18VDC 36VDC 4:1 input 24Vin nom. 48Vin nom. 8VDC 16VDC 9VDC 18VDC Under Voltage Lockout Start-up Time Min.
PAGE 3
REM6 DC/DC Converter Series Specifications (measured @ Ta= 25°C, nominal input voltage, full load and after warm-up) PROTECTIONS Parameter Condition Type Value Short Circuit Protection (SCP) continuous, auto-recovery Over Load Protection (OLP) % of Iout rated Hiccup mode, 150% typ. 3.3Vout 5Vout 12Vout 15Vout 24Vout 3.7VDC min. / 5VDC max. 5.6VDC min. / 7VDC max. 13.5VDC min. / 16VDC max. 18.3VDC min. / 22VDC max. 29.1VDC min. / 34.5VDC max. 5Vout Dual 12Vout 15Vout 5.6VDC min. / 7VDC max. 13.
PAGE 4
REM6 DC/DC Converter Series Specifications (measured @ Ta= 25°C, nominal input voltage, full load and after warm-up) Thermal Calculation Tcase hset = hfull load x fh Pdiss = Pout set hset - Pout set Tover = Rth x Pdiss Tamb = Tcase - Tover = baseplate temperature Tover = temperature losses [°C] Tamb = ambient temperature [°C] Pout nom. = nom.
PAGE 5
REM6 DC/DC Converter Series Specifications (measured @ Ta= 25°C, nominal input voltage, full load and after warm-up) Certificate Type (Others) Conditions Standard / Criterion Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests EN60601-1-2:2015 Industrial, scientific and medical equipment - Radio frequency disturbance characteristics - Limits and methods of measurement (7)
PAGE 6
REM6 DC/DC Converter Series Specifications (measured @ Ta= 25°C, nominal input voltage, full load and after warm-up) Dimension Drawing (mm) “A” Pinning (Standard) Pin Connections Pin # Single Dual 1 CTRL* CTRL* 2 -Vin -Vin 11 NC -Vout 14 +Vout +Vout 16 -Vout Com 22 +Vin +Vin 23 +Vin +Vin embossed logo 20.3 10.4 31.8 * If the CTRL option is not chosen, Pin 1 will be absent 3.80 Ø0.60+0.10 / -0.05 Recommended Footprint Details 2.54 Ø0.90 +0.
PAGE 7
REM6 DC/DC Converter Series Specifications (measured @ Ta= 25°C, nominal input voltage, full load and after warm-up) PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 255 x 21.8 x 16.5mm Packaging Quantity 7pcs Storage Temperature Range Stoarge Humidity -55°C to +125°C non-condensing 5% to 95% RH max. 16.5±0.75 11.5±0.75 0.5±0.2 Tube Dimension Drawing (mm) 11±0.75 21.8±0.