Datasheet

DC/DC Converter
www.recom-power.com
REV.: 1/2019 MED-1
30 Watt
4:1 Input
2“ x 1“
Single and Dual
Output
Features
Regulated
Converter
Reinforced insulation for 250VAC working voltage
Clearance and creepage distance >8.0mm
5kVAC I/P to O/P 2MOPP isolation
2µA patient leakage current
Industry standard pinout
4:1 wide input range
REM30-W
“CTRL pin option (positive logic)”
Wide Input Voltage Range (4:1)
Single or Dual
Output Power
nom. Input Voltage
nom. Output Voltage
REM30- __ __ _ W/P
Selection Guide
Part Input Output Output Efficiency Max. Capacitive
Number Voltage Range Voltage Current typ.
(1)
Load
(2)
[VDC] [VDC] [mA] [%] [µF]
REM30-2405SW
(3)
9-36 5 6000 88 7200
REM30-2412SW
(3)
9-36 12 2500 89 1200
REM30-2415SW
(3)
9-36 15 2000 89 1000
REM30-2424SW
(3)
9-36 24 1250 89 375
REM30-2405DW
(3)
9-36 ±5 ±3000 86 ±3600
REM30-2412DW
(3)
9-36 ±12 ±1250 89 ±750
REM30-2415DW
(3)
9-36 ±15 ±1000 89 ±500
REM30-4805SW
(3)
18-75 5 6000 89 7200
REM30-4812SW
(3)
18-75 12 2500 89 1200
REM30-4815SW
(3)
18-75 15 2000 89 1000
REM30-4824SW
(3)
18-75 24 1250 89 375
REM30-4805DW
(3)
18-75 ±5 ±3000 86.5 ±3600
REM30-4812DW
(3)
18-75 ±12 ±1250 90 ±750
REM30-4815DW
(3)
18-75 ±15 ±1000 89.5 ±500
Model Numbering
Notes:
Note1: Efficiency is tested at nominal input and full load at +25°C ambient
Note2: Max Cap Load is tested at nominal input and full resisitive load
Notes:
Note3: standard is with suffix „/P“ (CTRL pin with positive logic)
without suffix is without CTRL pin (no pin) please refer to „Dimension Drawing (mm)“
Ordering Examples:
REM30-2412SW/P = 4:1 Input, 9-36Vin, 12Vout, with control pin positive logic
REM30-4815DW = 4:1 Input, 18-75Vin, ±15Vout, without control pin
Description
The REM30-W series of medical grade regulated DC/DC converters features reinforced 5kVAC/1 minute
isolation with low 2µA leakage (B, BF and CF compatible) and are 60601-1 3rd Ed. certified for 250VAC
continuous working voltage isolation. The industry standard 2”x1” package offers tightly regulated single
and dual outputs, with low output ripple and zero-load operation. The outputs are also short circuit and
overload protected. The converters are certified to CB, IEC/EN and ANSI/AAMI standards and carry the
UL mark.
UL60950-1 certified
CSA/CAN C22.2 60950-1-07 certified
UL62368-1 certified
CSA/CAN C22.2 62368-1 certified
CSA/CAN C22.2 60601-01 certified
ANSI/AAMI ES60601-1 certified
EN55011 certified
CB report
2MOPP
250VAC
E314885

Summary of content (8 pages)