Datasheet

ManualsBrandsRECOM ManualsPSU ComponentsDC/DC converter (print) 5 V 2 A 10 W No. of outputs: 1 x

CTRL Option

(4)

Pinning

(3)

Input Type

(2)

Model Numbering

Refer to Applications Notes

DC/DC Converter

Output Power

Input Voltage

(1)

Output Voltage

Single or Dual

MED-1

REV.: 0/2015www.recom-international.com

Notes:

Note1: for 4:1 Input Voltage Type add “W”, see Note 2.

2:1 4:1 “W”

xx= 4.5-9 Vin = “05” xx= 9-36Vin = “24”

xx= 9-18Vin = “12” xx= 18-75Vin = “48”

xx= 18-36Vin = “24”

xx= 36-75Vin = “48”

Note2: Blank for Standard 2:1 Input Voltage Range; „W“ sufﬁx for 4:1 Input Voltage Range

Note3: „A“ sufﬁx for A pinning; „C“ sufﬁx for C pinning, for more details refer to Package Style and Pinning

Note4: „CTRL“ sufﬁx for control pin option, for A pinning only, for C pinning not aviable

Examples:

REM10-0512D/A = 2:1 Input, 4.5-9Vin, ±12Vout, pinout „A“, without control pin

REM10-1215S/C = 2:1 Input, 9-18Vin, 15Vout, pinout „C“, without control pin

REM10-4815SW/A/CTRL = 4:1 Input, 36-75Vin, 15Vout, pinout „A“ with control pin

REM10-243.3SW/C = 4:1 Input, 9-36Vin, 3.3Vout, pinout „C“, without control pin

10 Watt

2:1 & 4:1

DIP24

Single and Dual

Output

REM10- __ __ __ __ / __ __

Features

Regulated

Converters

• Reinforced Insulation for 250VAC Working Voltage

• Clearance and Creepage Distance: 8mm

• 5kVAC I/P to O/P 2MOPP Isolation

• 2µA Patient Leakage Current

• Industry Standard Pinout

• 2:1 and 4:1 Wide Input Range

Description

The REM10 series of medical grade regulated DC/DC converters feature reinforced 5kVAC/1 minute

isolation with low 2µA leakage and are 60601-1 3rd Ed. certiﬁed for 250VAC continuous working. The

compact DIP24 package offers tightly regulated single and dual outputs, even under no-load conditions.

The outputs are short circuit and overload protected. The converters are available in two different pin-

ning options and optionally with an external control pin for standby consumption as low as 12.5mW. The

converters are fully certiﬁed to CB, IEC/EN and ANSI/AAMI standards and carry the CE and UL marks.

Selection Guide

Part Input Output Output Efﬁciency Max. Capacitive

Number Voltage Range Voltage Current typ. Load

(VDC) (VDC) (mA) (%) (µF)

REM10-xx3.3S/* 4.5-9 / 9-18 / 18-36 / 36-75 3.3 2500 80 / 83 / 83 / 82.5 3000

REM10-xx05S/* 4.5-9 / 9-18 / 18-36 / 36-75 5 2000 84 / 85.5 / 86.5 / 86.5 2500

REM10-xx12S/* 4.5-9 / 9-18 / 18-36 / 36-75 12 830 86.5 / 88 / 89 / 89 430

REM10-xx15S/* 4.5-9 / 9-18 / 18-36 / 36-75 15 670 87 / 89 / 89 / 89 350

REM10-xx24S/* 4.5-9 / 9-18 / 18-36 / 36-75 24 416 85.5 / 89 / 89 / 88. 125

REM10-xxx05D/* 4.5-9 / 9-18 / 18-36 / 36-75 ±5 ±1000 83 / 84 / 85 / 85 ±1440

REM10-xx12D/* 4.5-9 / 9-18 / 18-36 / 36-75 ±12 ±416 85.5 / 89 / 89 / 88 ±250

REM10-xx15D/* 4.5-9 / 9-18 / 18-36 / 36-75 ±15 ±333 86.5 / 88 / 89 / 88 ±180

REM10-xx3.3SW/* 9-36 / 18-75 3.3 2500 83 / 82.5 3000

REM10-xx05SW/* 9-36 / 18-75 5 2000 86.5 / 86.5 2500

REM10-xx12SW/* 9-36 / 18-75 12 830 89 / 89 430

REM10-xx15SW/* 9-36 / 18-75 15 670 89 / 89 350

REM10-xx24SW/* 9-36 / 18-75 24 416 89 / 88.5 125

REM10-xx05DW/* 9-36 / 18-75 ±5 ±1000 85 / 85 ±1440

REM10-xx12DW/* 9-36 / 18-75 ±12 ±416 89 / 88 ±250

REM10-xx15DW/* 9-36 / 18-75 ±15 ±333 88 / 88 ±180

REM10

2MOPP

250VAC

E224736

UL-60950-1 (Pending)

EN-55011 (Pending)

EN-55022 (Pending)

IEC/EN-60950-1 (Pending)

IEC/EN-60601-1 (Pending)

Summary of content (5 pages)

PAGE 1
Features • • • • • • Regulated Converters Reinforced Insulation for 250VAC Working Voltage Clearance and Creepage Distance: 8mm 5kVAC I/P to O/P 2MOPP Isolation 2µA Patient Leakage Current Industry Standard Pinout 2:1 and 4:1 Wide Input Range Description REM10 10 Watt 3 2:1 & 4:1 DIP24 Single and Dual Output 3Y The REM10 series of medical grade regulated DC/DC converters feature reinforced 5kVAC/1 minute isolation with low 2µA leakage and are 60601-1 3rd Ed. certified for 250VAC continuous working.
PAGE 2
REM10 DC/DC Converter Series Specifications (measured at TA= 25°C, nominal input voltage, full load and after warm-up) BASIC CHARACTERISTICS Parameter Condition 2:1 Absolute Maximum Input Voltage ( 3sec max.) 4:1 2:1 Typ. Max. 16VDC 25VDC 50VDC 100VDC 50VDC 100VDC 5Vin nom. 12Vin nom. 24Vin nom. 48Vin nom. 24Vin nom. 48Vin nom Under Voltage Lockout 4:1 Start-up Time Min. 5Vin nom. 12Vin nom. 24Vin nom. 48Vin nom. 24Vin nom. 48Vin nom 4VDC 8VDC 16VDC 33VDC 8VDC 16VDC 4.
PAGE 3
REM10 DC/DC Converter Series Specifications (measured at TA= 25°C, nominal input voltage, full load and after warm-up) Calculation Example: Efficiency (%) 100 90 choose your model: 80 REM10-1212D 70 • Efficiency from Table1 (= 89% @ max Load / nom Vin) 60 50 • Loading conditions in application (= 50%) 10 20 30 40 50 60 70 80 • use Eff factor from Graph1 (= 0.99) Load (%) Calculation: Eff50% = Eff100% * Efffactor50% = 89 * 0.991 = 88.19% Vin = 12V Pout100% * 0.
PAGE 4
REM10 DC/DC Converter Series Specifications (measured at TA= 25°C, nominal input voltage, full load and after warm-up) ENVIRONMENTAL Parameter Condition Relative Humidity 5% to 95% RH Temperature Coefficient Thermal Impedance MTBF (+25°C) Value ±0.02% / °C natural convection (20LFM) according to MIL-HDBK-217F, full load max. Case Temperature Range max.
PAGE 5
REM10 DC/DC Converter Series Specifications (measured at TA= 25°C, nominal input voltage, full load and after warm-up) DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Potting non-conductive black plastic Silicone (UL94-V0) Package Dimensions (LxWxH) 31.80 x 20.30 x 10.20mm Package Weight 14g Packaging Dimensions (LxWxH) Tube 225 x 21.80 x 16.