Datasheet
REC3-R
Pin Connections
Pin # Single Dual
1 +Vin +Vin
2 No Pin –Vout
3 No Pin Com
10 –Vout Com
11 +Vout +Vout
12 –Vin –Vin
13 –Vin –Vin
14 +Vout +Vout
15 –Vout Com
22 No Pin Com
23 No Pin –Vout
24 +Vin +Vin
NC = No Connection
Package Style and Pinning (mm)
ECONOLINE
DC/DC-Converter
1
Bottom View
Top View
12
11
10
32
13
14
15
22
23
24
15.24
20.30
2.54
1.00
ø
+0.15/0
0.51
32.00
10.20
3.8+0.5 /-0.25
2.06
2.54
Recommended Footprint Details
24 PIN DIP Package
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
20.32
9
10
11
12
24
23
22
16
15
14
13
21
20
1
325
4
1
1.50
25.40
10.90
Bottom View
23.40
25.40
Pin area
0.1 x 0.50
0.50
32.00
11.20
2.54
24.14
27.94
26.54
1.60
2.40
Top View
24 PIN DIP SMD Package
Recommended Footprint Details
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
SMD pin
connections
follow standard
package
pinning.
All unused pins
are NC (No
Connection).
Pin Connections
Pin # Single Dual
1 +Vin +Vin
2 NC –Vout
3 NC Com
4NCNC
5NCNC
9NCNC
10 -Vout Com
11 +Vout +Vout
12 -Vin -Vin
13 -Vin -Vin
14 +Vout +Vout
15 -Vout Com
16 NC NC
20 NC NC
21 NC NC
22 NC Com
23 NC -Vout
24 +Vin +Vin
Specifications (measured at T
A
= 25°C, nominal input voltage, full load and after warm-up)
Notes
Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter
Note 2: The REC3-R series requires a minimum of 10% load on the output to maintain specified regulation. Operating under no-load
conditions will not damage these devices; however, they may not meet all listed specifications.
REC3-S_DR/H1
Series
Certifications
EN General Safety Report: SPCLVD1212007 EN60950-1:2006 + A11:2009+A1:2010+A12:2011
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit
written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
REV: 0/2015 www.recom-power.comE-140