Datasheet

RCD-PL
Analogue Dimming
Digital Dimming
1
0
PWM Digital Control Signal
Output Current (LED appears dim)
Output Current (LED appears bright)
PWM Digital Control Signal
1
0
200Hz
Typ.
200Hz
Typ.
LIGHTLINE
DC/DC-Converter
RCD-24-PL
Series
Package Style and Pinning
Dimming
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pad Connections RCD-24-PL Series
Pad # Out Comments
1 +Vin DC Supply
2 Analogue Dimming Leave open if not used
3 PWM/ON/OFF Leave open if not used
4 GND Do not connect to -Vout
5 -Vout LED Cathode Connection
6 +Vout LED Anode Connection
Bottom View
PCB Layout Top View
6
5
1
3
2
4
Class A Version
Class A (1.00A-Version)
Class B Version
2.54
2 x 2.5 SMT Pad x 6
6.6
2.54
25.4
31.00
11.4
7.6
1.9
1mm half Via x 6
6.6
9.0
Voltage Control (0-15V max)
Output Current
100%
0%
1V 2V 3V 4V 15V
0.13V
Analogue Input Voltage
10V
300-700mA
4.2V
1000mA
4.35V
www.recom-power.com L-11REV: 1/2016
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit
written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
Note:
3. If PWM dimming is used, a capacitor on output in parallel is required.
RCD-24-PL
Vin
GND
Analogue
Vout-
Vout+
PWM ON/OFF
C1
P/N C1
RCD-24-0.30/PL/X
33μFRCD-24-0.35/PL/X
RCD-24-0.50/PL/X
RCD-24-0.60/PL/X
47μF
RCD-24-0.70/PL/X
RCD-24-1.00/PL/A 150μF