Datasheet

ManualsBrandsRecom ManualsLED DriversLED Driver 4W 170mA 24V IP65

AC/DC Converter

www.recom-power.com

REV.: 2/2019 L-1

RACV04

Description

These constant voltage LED drivers have been designed for cost-sensitive applications. The SELV

outputs are suitable for built-in power-supply LED luminaires. Their low proﬁle design allows them

to be invisibly built into furniture, discreetly mounted under shelves or integrated in space-restricted

applications such as coving lighting, strip lighting or troffer lighting systems. The power supplies are

short circuit and overload protected and come with a full 3-year warranty.

Features

LED

Driver

• 4W AC-DC class II LED power supply

• 12V and 24V constant voltage output

• Fully protected (OLP, SCP, OCP, OTP)

• Low standby power, ErP conform

• IP65 (suitable for dry and damp locations)

• Low cost

• CE, CB, ENEC, CSA and UL8750 certiﬁed

• Wired connections for independent or built-in use

Model Numbering

Output Current

nom. Output Power

RACV04- ___

All LED Drivers may not be used without a load. They must be switched on the primary side only.

Noncompliance may damage the LED or reduce its lifetime.

Speciﬁcations (measured @ ta= 25°C, 240VAC and rated load)

4 Watt

Constant

Voltage

Single

Output

Selection Guide

Part Input Input Output Output Efﬁciency Output

Number Voltage Range Current Voltage Current Range typ. Power max.

[VAC] [mA] [VDC] [mA] [%] [W]

RACV04-12 90-264 100 12 0-330 75 4

RACV04-24 90-264 100 24 0-170 75 4

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Input Voltage Range 90VAC 230VAC 264VAC

Inrush Current 11A

Start-up Time 500ms

Input Frequency Range 47Hz 63Hz

No Load Power Consumption 0.5W

Power Factor full load, 230VAC 0.40

Internal Operating Frequency full load 64kHz

Output Ripple Voltage

(1)

12VDC

24VDC

120mVp-p

240mVp-p

Notes:

Note1: Measured at 20MHz BW using 0.1µF & 47µF parallel capacitor.

ERP

compliant

UL8750 Certiﬁed

CSA C22.2 No. 250.13 Certiﬁed

IEC/EN61347-1 Certiﬁed

IEC/EN61347-2-13 Certiﬁed

IEC62384 Certiﬁed

EN55015 Compliant

ENEC

CB Report

Summary of content (4 pages)

PAGE 1
• • • • • • • • Features LED Driver 4W AC-DC class II LED power supply 12V and 24V constant voltage output Fully protected (OLP, SCP, OCP, OTP) Low standby power, ErP conform IP65 (suitable for dry and damp locations) Low cost CE, CB, ENEC, CSA and UL8750 certified Wired connections for independent or built-in use Description These constant voltage LED drivers have been designed for cost-sensitive applications. The SELV outputs are suitable for built-in power-supply LED luminaires.
PAGE 2
RACV04 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 240VAC and rated Iout) REGULATIONS Parameter Condition Value Output Voltage Accuracy ±5% max. Line Regulation 5% max. Load Regulation 5% max. PROTECTION Parameter Condition Input Fuse Value external fuse is recommended 0.
PAGE 3
RACV04 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 240VAC and rated Iout) SAFETY AND CERTIFICATIONS Certificate Type Report Number ETL Standard for LED Equipment for use in Lighting Products 160428123GZU-001 LED Equipment for Lighting Applications Lamp Controlgear: General Requirments for Safety (LVD) Standard UL8750, 2nd Edition, 2015 CSA C22.2 No. 250.13, 2014-07-01 EN61347-1:2015 Lamp Controlgear: Particular Requirements for d.c. or a.c.
PAGE 4
RACV04 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 240VAC and rated Iout) Mechanical Dimensions 38.0 172±1 18.0 1 2 FC 13.5 10±1 double insulation tc 3 4 10.0 172±1 FC 48.0 10±1 2.2 21.0 27.0 54.0 8.4 Wire/cable information # 1 2 3 4 Function Wire color VAC in (N) blue VAC in (N) brown LED+ red LEDblack Type UL-1007 UL-1007 UL-1007 UL-1007 AWG 18 18 18 18 tc= case temperature measuring point FX= fixing centers Tolerance: xx.x= ±0.5mm xx.xx= ±0.