Datasheet

ManualsBrandsRecom ManualsPOWERDC Power Supply, 100W, 24V, 4.17A

Features

Regulated

Converter

• Long 5 year warranty

• 2MOPP/250VAC

• Suitable for built in Class II applications

• Wide input voltage range (85-264VAC)

• Low leakage current (<75µA)

• 5000m operation

• Active power factor correction

• Connector set available

Description

The RACM100 is a compact 3” x 2” high efﬁciency AC/DC power supply with 2xMOPP 3rd Ed. safety

approval for medical applications. The range has now been extended to include open frame models

(/OF sufﬁx). Like the original enclosed versions, the RACM100/OF series are space-saving universal

input voltage power supplies (85-264VAC), with 4kVAC isolation, PFC, no minimum load and can be

used at ambient temperatures of between -25°C and +85°C. The 12V, 15V, 24V or 48V output voltages

are fully protected and have tolerances of less than ±0.2% over the entire input voltage range and less

than ±0.5% over the entire load range. The RACM100/OF series is certiﬁed to medical safety standard

IEC/ES/EN-60601-1 3rd Edition and feature BF rated outputs with less than 75µA leakage current.

It has a built-in Class B EMI ﬁlter and comes with a ﬁve year warranty.

RACM100

AC/DC Converter

www.recom-power.com

REV.: 10/2019 MED-1

100 Watt

Enclosed &

Open Frame

Case Style

Single Output

IEC/EN60601 certiﬁed

ANSI/AAMI ES60601 certiﬁed

EN55011 certiﬁed

CISPR11

FCC Part 15

2MOPP

250VAC

E314885

Selection Guide

Part Input Output Output Input Power Efﬁciency Max. Capacitive

Number Voltage Range Voltage Current @ No Load typ. Load

(1)

[VAC] [VDC] [A] [W] [%] [µF]

RACM100-12S

(1)

85-264 12 8.34 0.3 91 6950

RACM100-15S

(1)

85-264 15 6.67 0.3 92 4450

RACM100-24S

(1)

85-264 24 4.17 0.3 92 1750

RACM100-48S

(1)

85-264 48 2.09 0.3 91 430

Case Style

(2)

Single

Output Power

Output Voltage

Model Numbering

RACM100- __ S/ __

Notes:

Note2: without sufﬁx, standard enclosed case

add sufﬁx “/OF” for open frame style

Notes:

Note1: Max Cap Load is tested at minimum input and full resistive load

Examples:

RACM100-12S = 12Vout, standard enclosed case

RACM100-24S/OF = 24Vout, open frame style

Summary of content (7 pages)

PAGE 1
• • • • • • • • Features Regulated Converter Long 5 year warranty 2MOPP/250VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (<75µA) 5000m operation Active power factor correction Connector set available AC/DC Converter RACM100 Description The RACM100 is a compact 3” x 2” high efficiency AC/DC power supply with 2xMOPP 3rd Ed. safety approval for medical applications. The range has now been extended to include open frame models (/OF suffix).
PAGE 2
RACM100 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 250VAC, full load and after warm-up) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. 85VAC 120VDC Input Voltage Input Current 115VAC, fulll load 230VAC, full load Inrush Current cold start, 230VAC 264VAC 370VDC 1.15A 0.55A 60A No load Power Consumption 0.11W Input Frequency Range AC Input 47Hz 63Hz Output Voltage Trimming ±10.0% Minimum Load 0% Power Factor 0.
PAGE 3
RACM100 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 250VAC, full load and after warm-up) REGULATIONS Parameter Condition Value Output Accuracy 230VAC, full load ±1.0% Line Regulation low line to high line, full load ±0.2% Load Regulation 0% to 100% load 10% to 100% load 0.5% max. 0.4% max. Transient Peak Deviation load step from 50% - 75% change at 2.5A/µs 3.0% Vout max. Transient Recovery Time load step from 50% - 75% change at 2.5A/µs 500µs typ.
PAGE 4
RACM100 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 250VAC, full load and after warm-up) Derating Graph (@ Chamber and natural convection 0.
PAGE 5
RACM100 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 250VAC, full load and after warm-up) EMC Compliance (Industrial) Conditions Standard / Criterion 47CFR FCC Part 15 Subpart B, Class B Limitations on the amount of electromagnetic intererence allowed from digital & electronic devices Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz ANSI C63.
PAGE 6
RACM100 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 250VAC, full load and after warm-up) Dimension Drawing Enclosed (mm) 24.5 Trim Adj. 62.0 FC 41.3 CON2 CON1 Top View 22.1 76.2 Connection via Connector AC Input (CON1) FC 84.2 91.4 Side View Pin # Pin Header 1 AC/L 3 AC/N SVH-21T-P1.1 1.20 39.2 DC Output Connector (CON2) Pin # Pin Header 1,2 -Vout 3,4 +Vout SVH-21T-P1.
PAGE 7
RACM100 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 250VAC, full load and after warm-up) Dimension Drawing Open Frame (mm) Top View Connection via Connector AC Input (CON1) CON1 Trim Adj. 18.5 CON2 FC 44.4 50.8 76.2 Ø3.2 FC 69.8 29.5 Pin # Pin Header 1 AC/L 3 AC/N SVH-21T-P1.1 DC Output Connector (CON2) Pin # Pin Header 1,2 -Vout 3,4 +Vout SVH-21T-P1.1 FC= fixing centers Crimp Terminal AWG Range: 18-22AWG Suggested Plug: RECOM Connector SET OF Tolerance: ±0.5mm 2.5 1.