Datasheet

RACD150-A
RoHS
2011/65/EU
6/6
LIGHTLINE
AC/DC-Converter
with 5 year Warranty
150 Watt
Single
Output
Selection Guide
Input Voltage Range 90-305 VAC or 127-430VDC
Input Frequency Range 47-63Hz.
Power Factor Full Load, 120VAC >0.98
Full Load, 240VAC >0.94
75% Load, 240VAC >0.90
DC Dimming Open = 100% DC 1-10V
PWM Dimming Open = 100% Duty 10% - 100%
Freq. 500Hz - 3000Hz
Voltage Hi=10V, Low=0V
THD (@ 230VAC/50Hz) 700A ±10%
1050A, 1400A ±11%
Input Current 115VAC 2A max.
240VAC 1A max.
Input/Output Isolation 3.75kVAC / 1min
Input/Case Isolation 1.8kVAC / 1min
Output/Case Isolation 0.5kVAC / 1min
Leakage Current 230VAC <0.75mA
Inrush Current 240VAC cold start 65A max.
Voltage Tolerance ±10%
Current Tolerance ±5%
Ripple & Noise (@20MHz bandwidth)
(1)
2000mV max.
Over Voltage Protection 105 - 130% Rated Voltage Shutdown Mode
Short Circuit Protection Constant current limit and recovers after fault condition is removed
Over Temperature Protection Shutdown Mode
Operating Temperature Range
(Refer to Output Load Derating Curve) Ambient -40°C to +55°C
(free air convection) Case Temperature 100°C max.
Operation Humidity 20%-90% RH Non-Condensing
Storage Temperature -40°C to +80°C
Storage Humidity 10%-95% RH
Vibration 2G 10min/1Cycle, Period for 60 min 10-500Hz
continued on next page
Specifications (measured at 230VAC and 25°C ambient temperature)
●
High Output Voltage
●
Universal AC Input
●
Constant Current Operation
●
Active Power Factor Correction
●
IP67 Design for Indoor and Outdoor Use
●
Compact Size
●
Digital PWM and Analogue Voltage Dimming
Features
LED DRIVER
Part Input Rated Output Rated
Number Voltage Range Power Voltage Range Output Current Efficiency
(VAC) (W) (VDC) (mA) (%)
RACD150-700A 90-305 147 60-210 700 92
RACD150-1050A 90-305 150 60-143 1050 92
RACD150-1400A 90-305 150 60-107 1400 91
UL 8750 Certified
EN 61347 Certified
-40 10-10 30 55 70
20%
40%
60%
80%
100%
Load
Ambient Temperature (°C)
Description
The new RACD150A LED drivers offer constant output currents of 1400mA, 1050mA or 700mA, with voltages
from 60V up to 210V. The series supports dimming via PWM or 1-10V signals and is fully IP67 sealed for
outdoor as well as indoor applications. With their wide input voltage range of 90 to 305VAC, the new drivers can
be used worldwide on 115Vac, 230Vac and 277Vac supplies. The converters operate with full load efficiencies
of more than 93%, feature low THD (15%) and active PFC with power factors exceeding 0.98, and are fully
protected against short circuit, overload and over-temperature conditions. Applications include high-power area
lighting as well as car parks, warehouse or security lighting. The LED drivers are UL8750 and EN61347 certified,
comply with FCC and European EMC standards and come with a full 5 year warranty.
Refer to Application Notes
Derating-Graph
(Ambient Temperature)
L-70 www.recom-power.comREV: 0/2015