Datasheet

ManualsBrandsRecom ManualsLED DriversLED Driver 7W 250mA 28V IP67

AC/DC Converter

www.recom-power.com

REV.: 2/2019 L-1

Features

Constant

Current

LED Driver

• 7W Class II AC-DC LED power supply

• Suitable for high brightness LED

• 250mA, 350mA, 500mA and 700mA constant

current operation

• 3.75kVAC isolation

• Fused input and SCP, OCP, OVP, OLP

• IP67 rated

RACD07

Model Numbering

nom. Output Power

RACD07-___

Description

The RACD07 is a constant current 7W AC/DC source for LED lighting with a wide input voltage range.

The LED drivers are available with constant current outputs of 250mA, 350mA, 500mA or 700mA.

The series is IP67 rated and suitable for use in dry, damp or wet areas. RACD07 drivers have a

3 year warranty.

Selection Guide

Part Input Constant Current

(1)

Efﬁciency Rated Power

Number Voltage Range Mode min. max.

[VAC] [VDC] [mA] [%] [W]

RACD07-250 90-295 14-28 250 75 7

RACD07-350 90-295 10-20 350 70 7.3

RACD07-500 90-295 5-14.5 500 70 7.2

RACD07-700 90-295 3-10.5 680 70 7.4

All LED Drivers may not be used without a load. They must be switched on the primary side only.

Noncompliance may damage the LED or reduce its lifetime.

Notes:

Note1: Constant current operation region is within 75%-100% rated output voltage. This is the suitable

operation region for LED related applications, but please reconﬁrm special electrical requirements

for some speciﬁc system design.

nom. Output Current

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Input Voltage Range

90VAC 230VAC 295VAC

120VDC 415VDC

Input Current full load, 100VAC 200mA

Inrush Current 230VAC 10A

No Load Power Consumption 230VAC 0.5W

Input Frequency Range 47Hz 63Hz

Power Factor 0.90

Start-up Time 1s

Hold-up Time 18ms

Set-up Time full load, 230VAC 0.5s

Internal Operating Frequency 45kHz

Output Ripple Current

(2)

20MHz BW 30mAp-p

continued on next page

Speciﬁcations (measured @ ta= 25°C and 115/230VAC)

Notes:

Note2: Measured with a 12“ twisted pair-wire terminated with 0.1µF & 47µF parallel capacitor

UL8750 certiﬁed

UL1310 certiﬁed

CAN/CSA-C22.2 No. 223-M91 certiﬁed

IEC/EN61347 certiﬁed

IEC/EN61347-2-13 certiﬁed

EAC certiﬁed

E340696

7 Watt

Constant

Current Single

Output

Summary of content (4 pages)

PAGE 1
• 7W Class II AC-DC LED power supply • Suitable for high brightness LED • 250mA, 350mA, 500mA and 700mA constant current operation • 3.75kVAC isolation • Fused input and SCP, OCP, OVP, OLP • IP67 rated Features Constant Current LED Driver Description The RACD07 is a constant current 7W AC/DC source for LED lighting with a wide input voltage range. The LED drivers are available with constant current outputs of 250mA, 350mA, 500mA or 700mA.
PAGE 2
RACD07 AC/DC Converter Series Specifications (measured @ ta= 25°C and 115/230VAC) Input Voltage vs. Load 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 80 90 100 120 140 160 180 200 220 240 295 Input Voltage [VAC] REGULATIONS Parameter Condition Output Voltage Accuracy Value includes: line, load and tolerance ±5% Output Current Accuracy ±3% typ. / ±7% max.
PAGE 3
RACD07 AC/DC Converter Series Specifications (measured @ ta= 25°C and 115/230VAC) Derating Graph (@ natural air convection 0.1m/s) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -20 -10 0 10 20 30 40 50 60 Ambient Temperature [°C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report Number Standard for LED Equipment for use in Lighting Products Standard for Class 2 Power Units UL8750, 1st Edition, 2012 E340696-1-7 CAN/CSA-C22.2 No. 250.
PAGE 4
RACD07 AC/DC Converter Series Specifications (measured @ ta= 25°C and 115/230VAC) DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material case potting plastic (UL94V-2) silicone (UL94V-0) Dimension (LxWxH) 57.0 x 40.8 x 24.0mm Weight 75g Dimensions Drawing (mm) 57.0 Wired Connection # Function Wire Color 1 VAC in (L) brown 2 VAC in (N) blue 3 LED+ red 4 LEDblack 3 4 4.0 15.