Datasheet

ManualsBrandsRecom ManualsPOWERDC Power Supply, 4W, 5V, 800mA

Features

Regulated

Converter

• Universal input 85-305VAC

• 4W PCB mount package

• <75mW No load power consumption

• Ultra low proﬁle, compact size

• -40°C to +85°C Operating temperature

• Continuous SCP, OCP, OVP

• IEC/EN/UL60950 & CE certiﬁed, EN55032 Class B

RAC04-GB

AC/DC Converter

www.recom-power.com

REV.: 5/2019 PA-1

Description

The RAC04-GB series are low cost AC/DC power supplies, ideal for PCB mounted, compact, board level

industrial applications. They feature universal AC input voltage range, regulated and short-circuit-proof

isolated DC outputs, low standby power consumption and -40°C to +85°C operating temperature range.

The RAC04-GB have a built-in Class B / FCC Part 15 EMC ﬁlter, are certiﬁed to IEC/EN/UL60950-1 and

are pending to IEC/EN/UL62368 and EN61558 safety standards and come with a three year warranty.

E196683

4 Watt

Single

Output

EMC Class B

Selection Guide

Part Input Output Output Efﬁciency Max. Capacitive

Number Voltage Range Voltage Current typ

(1)

Load

(2)

[VAC] [VDC] [mA] [%] [µF]

RAC04-3.3SGB 85-305 3.3 1210 70 2000

RAC04-05SGB 85-305 5 800 72 1500

RAC04-09SGB 85-305 9 440 77 1000

RAC04-12SGB 85-305 12 330 78 500

RAC04-15SGB 85-305 15 270 78 200

RAC04-24SGB 85-305 24 170 80 150

Notes:

Note1: Efﬁciency is tested at 230VAC and full load at +25°C ambient

Note2: Max. Cap. Load is tested at nominal input and full resistive load

Model Numbering

Ordering Examples:

RAC04-12SGB 12Vout Single Output EMC Class B

Single

nom. Output Power

nom. Output Voltage

RAC04-__ SGB

EMC Class B

UL60950-1 certiﬁed

IEC/EN60950-1 certiﬁed

UL62368-1 pending

IEC/EN62368-1 certiﬁed

EN61558-1 certiﬁed

EN61558-2-16 certiﬁed

CB report

Summary of content (6 pages)

PAGE 1
• • • • • • • Features Regulated Converter Universal input 85-305VAC 4W PCB mount package <75mW No load power consumption Ultra low profile, compact size -40°C to +85°C Operating temperature Continuous SCP, OCP, OVP IEC/EN/UL60950 & CE certified, EN55032 Class B Description The RAC04-GB series are low cost AC/DC power supplies, ideal for PCB mounted, compact, board level industrial applications.
PAGE 2
RAC04-GB AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Internal Input Filter Pi-type 85VAC 120VDC Input Voltage Range (3,4) 305VAC 430VDC 115VAC 230VAC Input Current Inrush Current 85mA 55mA 115VAC 230VAC cold start at 25°C 10A 20A No load Power Consumption 75mW Input Frequency Range AC Input 45Hz Minimum Load 65Hz 0% Power Factor 115VAC 230VAC 0.
PAGE 3
RAC04-GB AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) REGULATIONS Parameter Condition Value Output Accuracy ±2.5% max. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load 0.5% max. Deviation vs. Load (@ 115VAC, 230VAC) RAC04-05SGB RAC04-12SGB 2.5 2 2 1.5 1.5 1 Deviation [%] Deviation [%] 2.5 0.5 0 -0.5 -1 -1.5 1 0.5 0 -0.5 -1 -1.5 -2 -2 -2.5 -2.
PAGE 4
RAC04-GB AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Notes: Note6: Refer to local wiring regulations if input over-current protection is also required Note7: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note8: For operation ≥230VAC, an external MOV is recommended. The Varistor should comply with IEC61051-2. eg.
PAGE 5
RAC04-GB AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment, General Requirements for Safety E196683-A4 Standard UL60950-1, 2nd Edition, 2014 CAN/CSA C22.2 No. 60950-1-07, 2nd Edition, 2014 UL62368-1, 2nd Edition CAN/CSA C22.2 No 62368-1-14 Audio/video, information and communication technology equipment.
PAGE 6
RAC04-GB AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Dimension Drawing (mm) 37.0 24.0 embossed logo 36.7 23.5 Pin Connections 15.0 Pin # Recommended Footprint Details 10 x 2.54 = 25.40 5.08 2.54 2 3 7 x 2.54 = 17.78 1 Bottom View 5 4 5 4 Top View 1 2 1 VAC in (L) 2 VAC in (N) 3 NC 4 -Vout 5 +Vout NC: Not Connected Tolerance: xx.x ±0.5mm Pin Width: xx.xx ±0.05mm 2.54 3.11 3.26 3.5±0.5 0.60±0.