Datasheet

ManualsBrandsRecom ManualsPOWERDC Power Supply, 1W, 5V, 200mA

Description

The RAC01-GA series are low cost AC/DC power supplies, ideal for PCB mounted, compact,

board level industrial applications. They feature universal AC input voltage range, regulated and

short-circuit-proof isolated DC outputs, low standby power consumption and -25°C to +80°C operating

temperature range. The RAC01-GA have a built-in Class A / FCC Part 15 EMC ﬁlter, are

certiﬁed to EN60335, EN60950 and EN62368 safety standards and come with a three year warranty.

RAC01-GA

AC/DC Converter

www.recom-power.com

REV.: 4/2018 PA-1

E196683

Features

Regulated

Converter

• Universal input 85-264VAC

• <150mW No load power consumption

• Class

installations (without FG)

• -25°C to +80°C Operating temperature

• Continuous SCP, OCP

• E

N/IEC/UL60950, EN/IEC/UL62368 & EN60335-1 certiﬁed

1 Watt

Single

Output

EMC Class A

RAC01-GA

Selection Guide

Part Input Output Output Efﬁciency Max. Capacitive

Number Voltage Range Voltage Current typ

(1)

Load

(2)

[VAC] [VDC] [mA] [%] [µF]

RAC01-05SGA 85-264 5 200 63 500

RAC01-12SGA 85-264 12 83 68 200

Model Numbering

Ordering Examples:

RAC01-12SGA 12Vout Single Output EMC Class A

Single

nom. Output Power

nom. Output Voltage

RAC01-__ SGA

EMC Class A

On Request

RAC01-3.3SGA 85-264 3.3 303 63 500

RAC01-15SGA 85-264 15 66 63 200

RAC01-24SGA

(3)

85-264 24 42 63 200

Notes:

Note1: Measured with all input voltages at 25°C with constant resistant mode at full load

Note2: Max Cap Load is tested at nominal input and full resisitive load

Note3: Minimum order quantity ≥2000pcs

IEC/EN60950-1 certiﬁed

CAN/CSA-C22.2 No. 62368

pending

UL62368-1 pending

IEC/EN62368-1 pending

EN60335-1 certiﬁed

CB Report pending

Summary of content (6 pages)

PAGE 1
Features • Universal input 85-264VAC • <150mW No load power consumption AC/DC Converter • Class II installations (without FG) Regulated Converter • -25°C to +80°C Operating temperature • Continuous SCP, OCP • EN/IEC/UL60950, EN/IEC/UL62368 & EN60335-1 certified Description The RAC01-GA series are low cost AC/DC power supplies, ideal for PCB mounted, compact, board level industrial applications.
PAGE 2
RAC01-GA AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. nom.
PAGE 3
RAC01-GA AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) REGULATIONS Parameter Condition Value Output Accuracy -25°C to +80°C ±6.0% max. Line Regulation -25°C to +80°C ±2.0% max. Load Regulation -25°C to +80°C 6.0% max. Deviation vs.
PAGE 4
RAC01-GA AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) ENVIRONMENTAL Parameter Condition Operating Temperature Range @ natural convection 0.1m/s Value full load -25°C to +70°C refer to derating graph -25°C to +80°C Maximum Case Temperature +120°C Temperature Coefficient 0.03%/K Operating Altitude (10) 4000m Operating Humidity non-condensing 5% - 90% RH max. Pollution Degree PD2 Shock 10-150Hz, 2G 10min.
PAGE 5
RAC01-GA AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) EMC Compliance Condition Electromagnetic compatibility of multimedia equipment - Emission requirements Standard / Criterion EN55032, Class A Information technology equipment - Immunity characteristics - Limits and methods of measurement ESD Electrostatic discharge immunity test EA1804152E 01001 EN55024:2010+A1:2015 Air ±8.0kV, Contact ±4.
PAGE 6
RAC01-GA AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Dimension Drawing (mm) 3.7 ±0.5 19.0 embossed logo 22.2 33.7 2.85 Pin Connections Pin # Single 1 VAC in (L) 2 VAC in (N) 3 -Vout 4 +Vout 15.24 2.54 Ø0.8±0.03 2 Bottom View 2 4 3 3 2.54 7.62 1 Top View Tolerance: xx.x= ±0.5mm Pin width: ±0.03mm Pin length: -0.5/+0.9mm 4 1 28.