Datasheet

www.recom-power.com
REV.: 0/2019 P-2
Accessory
Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)
RAC-ADAPT-ST-1
DIMENSION AND PHYSICAL CHARACTERISTICS
Parameter Type Value
Dimension (LxWxH) 91.0 x 50.0 x 14.0mm
Weight 19g typ.
Dimension Drawing (mm)
Snap-on stop spacer suggestion (Model: Wuerth 709440800)
+Vout-Vout COM
FUSEAC
1 2 3
4 5 6
91.0
4x M3
FC 85.0
FC 45.0
3.5
5.08
7.5
50.0>14.0
11.6
10.011.0 10.0
14.0
1.6
Ø0.9
Ø1.05
VAR
F1
5.0 ±3.0 4.74.7
Ø8.0
1.80.75
Drilling in Panel Ø3.0
Panel Thickness 1.6
Drilling in Panel Ø4.0
Panel Thickness 0.8~1.6
Screw Terminal Information
# Function recommended Wire
1 FUSE 16AWG 1-1.5mm²
2 VAC 16AWG 1-1.5mm²
3 VAC 16AWG 1-1.5mm²
Output Screw Terminal
# Function recommended Wire
4 -Vout 16AWG 1-1.5mm²
5 COM 16AWG 1-1.5mm²
6 +Vout 16AWG 1-1.5mm²
wire stripping length: 6mm
recommended tightening torque: 0.6Nm max.
NC= no connection
FC= fixing centres
Tolerance: xx.x= ±0.5mm
xx.xx= ±0.25mm
Notes:
Note3: If spacers are needed, RECOM suggests to use Wuerth 70944xx00 series or similar)