Datasheet

INNOLINE
DC/DC-Converter
with 3 year Warranty
R-78B-1.5
www.recom-international.com I-25REV: 1/2013
1.5 AMP
SIP3
Single Output
● Efficiency up to 95%,Non isolated,
no need for heatsinks
● Pin-out compatible with LM78XX Linears
● Low profile( L*W*H=11.5*8.5*17.5mm)
● Wide input range.(4.75V ~ 18V)
● Short circuit protection, Thermal shutdown
● Non standard outputs available as specials
between 1.5V ~ 6.5V
● Low ripple and noise
● “L” Version with 90° pins
Features
Selection Guide
Part Input Output Output Efficiency
Number* Range Voltage Current Min. Vin Max. Vin
SIP3 (V) (V) (A) (%) (%)
R-78B1.5-1.5 4.75 – 18 1.5 1.5 83 78
R-78B1.8-1.5 4.75 – 18 1.8 1.5 85 81
R-78B2.5-1.5 4.75 – 18 2.5 1.5 88 84
R-78B3.3-1.5 4.75 – 18 3.3 1.5 91 88
R-78B5.0-1.5 6.5 – 18 5.0 1.5 94 92
R-78B6.5-1.5 8.0 – 18 6.5 1.5 95 93
Output Power (%)
120
100
20
60
100750
-40
Operating Temperature (°C)
0
80
5025
71
Safe Operating Area
85
40
Derating-Graph
(Ambient Temperature)
The R-78Bxx-1.5 Series high efficiency switching regulators are ideally suited to replace 78xx linear regulators and are
pin compatible. The efficiency of up to 95% means that very little energy is wasted as heat so there is no need for any
heat sinks with their additional space and mounting costs. The L-Version with 90° pins allows direct replacement for
laid-flat regulators where component height is at a premium.Low ripple and noise figures and a short circuit input
current of typically only 10mA round off the specifications of this versatile converter series.
Description
* add Suffix “L” for 90° bent pins, e.g. R-78B5.0-1.5L
R-78Bxx-1.5
-Vout
+Vout
+Vin
-Vin
Typical Application Circuit
EN-55022 Certified
EN-55024 Certified
EN-60950-1 Certified
RoHS
2011/65/EU
6/6