Manualshelf

Datasheet

ManualsBrandsRECOM ManualsPSU ComponentsDC/DC Converter 6.5 - 32 Vdc 3 - 8 Vdc 500 mA
12345
INNOLINE
DC/DC-Converter
with 3 year Warranty
R-78AA-0.5
www.recom-international.com
I-7
EN-60950-1 Certified
REV: 1/2010
Note 1:1.5V Output can be unstable with Vin>30VDC
0.5 AMP
SMD
Single Output
●
Replacement for R-78Axx-0.5SMD series
● RoHS 6/6 Conform (100% Lead Free)
●
Efficiency up to 97%,Non isolated,
no need for heatsinks
●
High Reflow Temperature SMD Package
● Adjustable Output Voltage
● Wide input range.(4.75V ~ 32V)
● Short circuit protection, Thermal shutdown
● Remote On/Off Control
● UL94V-0 Package Material
● Very Low Shutdown Current
● See Innoline Application Notes for use as an
inverter (alternative to LM79xx Linear)
Features
Selection Guide
Part Input Output Adjust Output Efficiency
Number Range (1) Voltage Range Current Min. Vin Max. Vin
SMD (V) (V) (V) (A) (%) (%)
R-78AA1.5-0.5SMD 4.75 – 30 1.5 fixed 0.5 73 63
R-78AA1.8-0.5SMD 4.75 – 32 1.8 1.5~3.0 0.5 82 71
R-78AA2.5-0.5SMD 4.75 – 32 2.5 1.5~3.0 0.5 87 77
R-78AA3.3-0.5SMD 4.75 – 32 3.3 3.0~5.5 0.5 91 81
R-78AA5.0-0.5SMD 6.5 – 32 5.0 3.0~8.0 0.5 94 86
R-78AA6.5-0.5SMD 8.0 – 32 6.5 3.3~11.0 0.5 95 88
R-78AA9.0-0.5SMD 11 – 32 9.0 4.5~12.6 0.5 96 92
R-78AA12-0.5SMD 15 – 32 12 4.5~12.6 0.5 97 94
R-78AA15-0.5SMD 18 – 32 15 fixed 0.5 97 95
Output Power (%)
120
100
20
60
100750
-40
Operating Temperature (°C)
0
80
5025
71
Safe Operating Area
85
40
Derating-Graph
(Ambient Temperature)
The R-78AAxx-0.5SMD series are manufactured without lead and meet the requirements for RoHS 6/6 as well as the
increased reflow soldering temperatures associated with vapour phase soldering, making these high efficiency
switching regulators ideally suited to modern pick-and-place mass production. The efficiency of up to 97% means that
very little energy is wasted as heat. The additional features of remote on/off control and adjustable output voltages will
find many uses in the battery-powered, industrial, medical and automotive markets.
Description
* add suffix -R for tape&reel packing e.g. R-78AA5.0-0.5-R. For more details see Application Notes.
Standard Application Circuit
R-78AAxx-0.5SMD
-Vout
+Vout
+Vin
-Vin
C1
10µF
(Optional)
100µF
(Optional)
C2
1,2
10
3,7,8,9
6
4,5
R1
R2Off/On
>1ms
To protect the converter from high inrush currents, use soft start Vin and C1=10µF
Output capacitor C2 recommended if load is very dynamic
RoHS
2002/95/EC
6/6

Summary of content (5 pages)