Datasheet
INNOLINE
DC/DC-Converter
with 3 year Warranty
R-78AA-0.5
IEC/EN-60950-1 Certified
Note 1:1.5V Output can be unstable with Vin>30VDC
0.5 AMP
SMD
Single Output
● Replacement for R-78Axx-0.5SMD series
● RoHS 6/6 Conform (100% Lead Free)
● Efficiency up to 97%,Non isolated,
no need for heatsinks
● High Reflow Temperature SMD Package
● Adjustable Output Voltage
● Wide input range.(4.75V ~ 32V)
● Short circuit protection, Thermal shutdown
● Remote On/Off Control
● UL94V-0 Package Material
● Very Low Shutdown Current
● See Innoline Application Notes for use as an
inverter (alternative to LM79xx Linear)
Features
Selection Guide
Part Input Output Adjust Output Efficiency
Number Range Voltage Range Current Min. Vin Max. Vin
SMD (V) (V) (V) (A) (%) (%)
R-78AA1.5-0.5SMD* 4.75 – 30 1.5 fixed 0.5 73 63
R-78AA1.8-0.5SMD* 4.75 – 32 1.8 1.5~3.0 0.5 82 71
R-78AA2.5-0.5SMD* 4.75 – 32 2.5 1.5~3.0 0.5 87 77
R-78AA3.3-0.5SMD* 4.75 – 32 3.3 3.0~5.5 0.5 91 81
R-78AA5.0-0.5SMD* 6.5 – 32 5.0 3.0~8.0 0.5 94 86
R-78AA6.5-0.5SMD* 8.0 – 32 6.5 3.3~11.0 0.5 95 88
R-78AA9.0-0.5SMD* 11 – 32 9.0 4.5~12.6 0.5 96 92
R-78AA12-0.5SMD* 15 – 32 12 4.5~12.6 0.5 97 94
R-78AA15-0.5SMD* 18 – 32 15 fixed 0.5 97 95
Output Power (%)
120
100
20
60
100750
-40
Operating Temperature (°C)
0
80
5025
71
Safe Operating Area
85
40
Derating-Graph
(Ambient Temperature)
The R-78AAxx-0.5SMD series are manufactured without lead and meet the requirements for RoHS 6/6 as well as
the increased reflow soldering temperatures associated with vapor phase soldering, making these high efficiency
switching regulators ideally suited to modern pick-and-place mass production. The efficiency of up to 97% means
that very little energy is wasted as heat. The additional features of remote on/off control and adjustable output
voltages will find many uses in the battery-powered, industrial, medical and automotive markets.
Description
* add suffix -R for tape&reel packing e.g. R-78AA5.0-0.5-R. For more details see Application Notes.
Standard Application Circuit
R-78AAxx-0.5SMD
GND
+Vout
+Vin
GND
C1
10µF
(Optional)
100µF
(Optional)
C2
1,2
10
3,7,8,9
6
4,5
R1
R2Off/On
>1ms
To protect the converter from high inrush currents, use soft start Vin and C1=10µF
Output capacitor C2 recommended if load is very dynamic
RoHS
2011/65/EU
6/6
www.recom-power.com I-7REV: 2/2016