Datasheet
www.recom-power.com
REV.: 4/2019 I-1
Features
Switching
Regulator
• Efficiency up to 94%, no need for heatsinks
• Pin compatible with LM78XX linears
• Low profile (L/W/H=11.5 x 7.55 x 10.2mm)
• Wide input range
• Short circuit protection, thermal shutdown
• Low ripple and noise
• IEC/EN60950-1 certified
R-78-1.0
Description
The R-78xx-1.0 series switching regulators are ideally suited to replace 1 Amp 78xx linear regulators
and are pin compatible. Efficiencies of up to 94% mean that very little energy is wasted as heat so there
is no need for any heat sinks with their additional space and mounting costs.
DC/DC Converter
1.0 Amp
SIP3
Single Output
IEC/EN60950-1 certified
EN55032 compliant
Selection Guide
Part Input Output Output Efficiency
Number Voltage Range Voltage Current @ min Vin @ max. Vin
[VDC] [VDC] [A] [%] [%]
R-781.8-1.0 4.75 - 18 1.8 1.0 82 76
R-782.5-1.0 4.75 - 18 2.5 1.0 87 81
R-783.3-1.0 4.75 - 18 3.3 1.0 90 84
R-785.0-1.0 6.5 - 18 5.0 1.0 94 89
Specifications (measured @ Ta= 25°C, 10% minimum load, unless otherwise stated)
BASIC CHARACTERISTICS
Parameter Condition Min. Typ. Max.
Quiescent Current Vin = min. to max. at 0% load
5mA 7mA
Internal Power Dissipation
0.4W
Minimum Load
(1)
0%
Internal Operating Frequency
280kHz 350kHz 430kHz
Output Ripple and Noise measured at 20MHz BW 20mVp-p 30mVp-p
Absolute Maximum
Capacitive Load
1 second start up, no external components 220µF
<1 second start up + diode protection circuit 6800µF
continued on next page
Notes:
Note1: Operation under no load will not harm the converter, but specifications may not be met
A minimum load of 10mA is recommended
Model Numbering
Output Voltage Output Current
R-78__-1.0