Datasheet

138
www.recom-electronic.com
2008
INNOLINE
DC/DC-Converter
RCD-24
Series
Specifications
-Continued
Case Material Non Conductive Black Plastic
Potting Material Epoxy (UL94-V0)
Dimensions 22.1 x 12.6 x 8.5mm
Weight 4.5g
Wave Soldering Profile Max. 265°C/10 sec.
PWM Dimming and ON/OFF Control (Leave open if not used)
Remote ON/OFF DC/DC ON Open or 0V<Vr<0.6V
DC/DC OFF (Standby) 0.6<Vr<2.9V
DC/DC OFF (Shutdown) 2.9V<Vr<6V
Remote Pin Drive Current Vr=5V 1mA max.
Quiescent Input Current in Shutdown Mode Vin=36V, Vr>2.9V 200µA max.
Maximum PWM Frequency for Linear Operation (measured 10%~90% Dimming) 200Hz
Analogue Dimming Control (leave open if not used)
Input Voltage Range 0 - 15V
Control Voltage Range Limits Full On 0.13V ± 50mV
(see Graph) Full Off 4.5V ± 50mV
Analogue Pin Drive Current Vc=5V 0.2mA max.
Environmental
Relative Humidity 5% to 95% RH, non-condensing
Conducted Emissions (all series, see note) EN55022 Class B
Radiated Emissions (all series except 700mA) EN55022 Class B
ESD (all series) EN61000-4-2 Class A
Radiated Immunity (all series) EN61000-4-3 Class A
Fast Transient (all series) EN61000-4-4 Class A
Conducted Immunity (all series) EN61000-4-6 Class A
MTBF (RCD-24-0.70, Nominal Vin, Full Load) +25°C 605 x 10³ hours
using MIL-HDBK 217F +71°C 516 x 10³ hours
Note: Requires an input filter to meet EN55022 ClassB conducted emissions, see below.
Vin = 24V, Iout = 300-700mA
Vin = 32V, Iout = 300-700mA
Class B Filter Suggestion