Datasheet

ManualsBrandsRECOM LIGHTING ManualsIndoor Lighting AccessoriesLED driver

LIGHTLINE

AC/DC-Converter

with 5 year Warranty

REV:1/2012 L-37www.recom-international.com

Please Read Application Notes

RACD30

30 Watt PFC

Single

Output

● 30W Class II AC-DC LED Power Supply

● 500mA or 700mA Constant Current

● Drives 3 - 15 High brightness LEDs

● Universal AC Input

● Active Power Factor Correction >0.95

● Fused Input, Protected Output

● 3kVAC Isolation

● UL-8750 Certified

● Output Connector to avoid miswiring

● Low Cost

● Long 5 Year Warranty

Features

LED

DRIVER

Selection Guide

Part Input Voltage Input Current Output Output Max

Number Range at full load Voltage Range Current #

(VAC) (mA) (VDC) (mA) LEDs

RACD30-500 universal 390 10-56 500 15 x 2W

RACD30-700 universal 390 10-43 700 12 x 3W, 12+12 x 1W

Input Voltage Range Standard 90-264VAC

Rated Power 30 Watts max.

Input Frequency Range 47-63 Hz

Power Factor Full Load, 115VAC/230VAC 0.9

Open Circuit Voltage 500mA Version 58VDC

(Zener Clamp) 700mA Version 48VDC

Inrush Current (<2mS) 115VAC/230VAC 10A max.

Input Current 230VAC, Full Load 390mA typ.

Leakage Current 115VAC/240VAC - 60/50Hz 0.5mA typ.

Input Fuse Standard T1A

Output Current Accuracy (combined Tolerance, load Regulation and Line Regulation) ±10%

Minimum Load Open Circuit Protected 3 LEDs

Hold Up Time 18ms min.

Operating Frequency 40 - 100 kHz typ.

Efficiency at Full Load 85%

RMS Isolation Voltage (input to output) 3kVAC / 1 minute

Temperature Coefficient ±0.02%/°C typ.

Overload Protection 120% typ.

Short Circuit Protection Continuous Current Limit

Output Overvoltage Protection 500mA Version 56V Zener Diode Clamp

700mA Version 43V Zener Diode Clamp

continued on next page

Description

Specifications

(typical at 25°C and after warm up time unless otherwise specified )

A compact 30W constant current switching power module suitable for driving up to 15 high power LEDs (Vf = 3.6V).

The output current is fixed at 500mA or 700mA. Active power factor correction is standard.

This series features both screw terminal and socket output connections. The socket connecter avoids the possibility of

miswiring and damaging the LED load if the LEDs are preassembled into a wiring harness or lamp fitting.

UL-8750 Certified

EN 61347 Certified

E340696

RoHS

2002/95/EC

6/6

Summary of content (2 pages)

PAGE 1
Features LED DRIVER ● ● ● ● ● ● ● ● ● ● ● LIGHTLINE 30W Class II AC-DC LED Power Supply 500mA or 700mA Constant Current Drives 3 - 15 High brightness LEDs Universal AC Input Active Power Factor Correction >0.95 Fused Input, Protected Output 3kVAC Isolation UL-8750 Certified Output Connector to avoid miswiring Low Cost Long 5 Year Warranty AC/DC-Converter with 5 year Warranty Description A compact 30W constant current switching power module suitable for driving up to 15 high power LEDs (Vf = 3.6V).
PAGE 2
RACD30 LIGHTLINE AC/DC-Converter Specifications cont. (typical at 25°C and after warm up time unless otherwise specified ) Overtemperature Protection Operating Temperature Range (free air convection) Shutdown, Automatic restart after cooling down Ambient Temperature -20°C to +50°C Case Temp. 85°C max. (500mA version: 90°C max.) Weight 169g Packing Quantity 1pc Storage Temperature Range -40°C to +100°C Humidity 95% RH max.