User manual

4
make sure the DVR network indicator LED is on.
(Please refer to Network Setup for further network setting information of
using static IP, PPPoE or DHCP. )
 Alarm Installation
Please refer to Installation for external alarm I/O installation. Please refer to
Alarm Setup.
 Speed Dome Installation
This device can support 3 kinds of communication protocol (Pelco D, Pelco P
& MIKAMI)
 Power Installation
Please use the provided power cable and adaptor to connect the DVR
(AC100V~AC240V). Please refer to Installation for connecting position. The
DVR system will enter into live viewing mode when power is connected.
Please refer to Display Setup - Live Viewing Mode for more information.
5. System Operation
There are 3 kinds of DVR control method: front panel, remote control and USB
mouse.
 USB Mouse Operation
1. Quick Menu: Right click the mouse button under the live viewing mode to
go for enter into Quick Menu.
2. Left click the mouse button under the main menu to go to the sub-select
menu.
3. Left click the mouse button under the select menu to go to the sub-menu.
4. Use the mouse to change the setting.
5. Please refer to Display Setup - PTZ Setup.
 Remote Control Operation
Remote Control and front panel operation are the same; please refer to Front
Panel and the reference table of the button as below.
CH2 display
Record
Quad display
Menu
Navigator
Fast Forward
Stop/ Remote ID Setup
Step/Pause
CH1 display
CH3 display
CH4 display
Mute
Ente
r
Fast Rewind
Play