4CH H.264 STANDALONE DVR SYSTEM USER MANUAL 2011 SEP V1.
WARNING Do not expose the DVR under the sunlight, heat or wet environment while installation. As it could decrease the performance of DVR and damage the machine. Do not touch the power plug or case with wet hands as this could result electric shock. Do not forcedly bend or put heavy object on power cable as this could result in injury to personal or equipment. Do not operate with damaged power cord or loose electrical outlet as this could result in electric shock or accident.
CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Specification ............................................................................................. 1 Front Panel ............................................................................................... 2 Installation ................................................................................................ 3 DVR Installation ........................................................................................
1. Specification Video System NTSC PAL Operating System Embedded Linux VGA Output D-SUB 15P VGA Video Input 4 x (1Vp-p 75R) BNC Audio Input 4 x RCA（CH1~CH4） Video Output 1 x (Monitor Out) BNC Audio Output 1 x RCA OSD Interface GUI interface / Multi-Language (English / Traditional Chinese / Others) Display Frame 240 fields/s (4x60 fields/s) 200 fields/s (4x50 fields/s) Recording Frame 30fps (CIF/HD1/D1) / 20fps(1.5D1) 25fps (CIF/HD1/D1) / 16fps(1.
2. Front Panel Power Indicator HDD Indicator The LED lights on when power on. The LED lights on when the HDD is written. Channel 1 Under the live viewing mode / playback mode channel 1 display. Channel 2 Under the live viewing mode / playback mode channel 2 display. Channel 3 Under the live viewing mode / playback mode channel 3 display. Channel 4 Under the live viewing mode / playback mode channel 4 display. Quad Menu Under the live viewing mode / playback mode Quad display.
3. Installation 1 Video In 1-4 CH Video Input (BNC) 2 Audio In 1-4 CH Audio Input 3 Video Out 1CH Video Output (BNC) 4 Audio Out 1CH Audio Output (RCA) 5 LAN 6 USB Mouse Port 7 Alarm I/O 8 XGA 9 Digital Output 10 E-SATA Support external storage system and the Port Multipliers function 11 RS-485 For Speed Dome Use 12 DC12V Power Input RJ-45 Network Connection 2.
make sure the DVR network indicator LED is on. (Please refer to Network Setup for further network setting information of using static IP, PPPoE or DHCP. ) Alarm Installation Please refer to Installation for external alarm I/O installation. Please refer to Alarm Setup. Speed Dome Installation This device can support 3 kinds of communication protocol (Pelco D, Pelco P & MIKAMI) Power Installation Please use the provided power cable and adaptor to connect the DVR (AC100V~AC240V).
Virtual Keyboard Operation The text input of the virtual keyboard is as below: Front Panel & Remote Menu Operation Mouse Operation Control Operation Select character from virtual keyboard [Up/Down/Left/Right] [Move Cursor] Keyin the select character [Enter] [Left Click] Exit the virtual keyboard [MENU] [Left Click]out of selection area Key Description of Virtual Keyboard Delete the previous character Switch to text input Enter key.
Setup Operation Front Panel & Remote Control USB Mouse Select [Up/Down/Left/Right] [Moving Cursor] Confirm Select Setting [Enter] [Left Click] Change the Select Setting [Left/Right] [Left Click] 6. Display Setup There are 3 kinds of screen display mode: Live, Auto Switching and PTZ. DVR. Live Viewing Mode The DVR will go to the live viewing mode after boot up.
Setup Operation Front Panel & Remote Control USB Mouse Select Item [Left/Right] [Moving Cursor] Enter the Select Item [Up/Down] [Moving Cursor] Confirm the Select Item [Enter] [Left Click] Exit [MENU] [Left Click] out of selection area PTZ Please set the speed dome properly before control PTZ. Please refer to PTZ Setup.
Fast Forward [Fast Forward] Step Forward [StepForward] Step/Pause [Step/Pause] Play 1x [Play] Stop [Stop] Digital Zoon None Drag by Left Click Derived Image None [Left click] 1~4 Single Channel Display [1~4 Channel] Select Channel [Double left click] 4 split Display [4 split] Under single channel [Double left click] Auto Switching 1. Auto switch starts from order CH1~CH4, 4 split channel. 2. Press the button again to stop the function. 7.
Select any of 4 channels to playback. Record List Enter Select Item Front Panel & Remote Controller [Enter] Select Item [Up/Down/Left/Right] Return to Upper Menu [MENU] Setup Operation USB Mouse [Left Click] [Moving Cursor] [Right click] or [Left click ] First Page Previous Page Next Page Last Page Mark all the events in this page BackUp List all of recording data and click on one of record data to playback.
8. Main Menu Camera Record Sensor Motion Network Log Search Back Up System 8.1 Setup Operation Front Panel & Remote Controller USB Mouse Select Item [Up/Down/Left/Right] [Moving Cursor] Enter Select Item [Enter] [Left Click] Exit Main Menu [MENU] [Right click] or [Left click ] Camera Setup Channel Select one channel to set. Use CopyButton to copy present settings to other channels. Camera Title Set the title of camera. Key in by using virtual keyboard.
PTZ Setting Type Speed dome model type. Set: PTC-301, PTC-203ST, FUM 626, JG_QG988, FUM 622SD, FUM 628 or off. Please select the correct communication protocol if you enable this setting. Protocol Speed dome protocol. Set: PELCO P, PELCO D, MIKAMI or off. Address Speed dome address. Set: 0~255 Baud Rate Speed dome baud rate. Set: 1200, 2400, 4800, 9600, 19200. Tour Time Speed dome tour time. Set: 5, 10, 15, 20, 25 sec or off. Tilt Opposite Set speed dome image upside down.
Number Preset Setting This function is preset 95 enter the menu Save Preset Setting Clear Preset Setting Clear All Preset Setting Return to Upper Menu 8.2 [Right click] or [Left click ] Buzzer Duration The buzzer ON duration when video loss. Alarm Relay Duration The Relay ON duration when video loss. Time Display Display the time in LIVE mode. Values: ON/OFF. Record Setup Record Enable Setup On/Off the channel. Watermark: Insert the words of watermark.
Frame Rate Setup Setting of Frame Rate: NTSC: 0-30 frames/sec; PAL: 0-25 frames/sec. Quality Setup Setting of recording quality: Values 1-5. The bigger value, the better quality. Pre Record setting Pre Recording time when motion alarm. Values: 0-10 seconds.
Privacy Zone Select channel for privacy mask setup. Channel: Select channel to setup. Press『COPY』 to copy the same setting to other channels. Enable: Enable/Disable the privacy mask function. Color: Select the color of privacy mask area setting in color Gray/Black/White/Red/Green/Bule/Yellow/Purple. Privacy Zone: Set the privacy mask area. Audio On/Off the sound effects. Encode Mode Encoding of channel. Values: VBR or CBR. Record schedule setup Always and Schedule Record.
8.3 8.4 Alarm Setup Channel Select the channel to set. COPY icon can copy the present setting to other channels. Mode Enable/disable alarm trigger. Set: On/Off. Record Duration The duration of the recording after triggered: 10, 20… 60 sec. Buzzer Duration The duration of the buzzer beeping after being triggered: 1, 5, 10, 15, 20, 30 sec. Alarm Duration Alarm out after alarm triggered: 1, 5, 10, 15, 20, 30 sec.
Setup Operation Front Panel & Remote Controller USB Mouse Area Selection [Up/Down/Left/Right] [Moving Cursor] (1)Move to the area (2)Press Enter to set the area [Drag by Left Click] (1)Move to the area (2)Press Enter to set the area [Drag by Left Click] [MENU] [Right Click] Set Detection Area: must set on none detection area(Transparent Area) Clear Detection Area: clear the set detection area: must set on detection area(Green Area) Return to Upper Menu 8.
Assigned IP address. Netmask Assigned net mask Gateway Assigned gateway PPPOE/3G PPPoE: Need account and password for PPPoE. 3G: Need account, password, APN and dial number for 3G. DDNS setting DNS1 First Domain Name Server, Default : 168.95.1.1 DNS2 Second Domain Name Server, Default :168.95.192.1 DDNS Enable/disable Dynamic Domain Name server. Values: On, Off. DDNS Server DDNS Server, Values: 3322, dyndns, cctvdvr.
E-Mail Setting E-MAIL Forward E-mail after alarm triggered. Enable: On/Off SSL Enable the SSL encryption. Recommend to set on if it is using gmail. Port SMTP port number key in. For example, gmail port 465. Server SMTP server key in. For example, gmail: smtp.gmail.com Password Sender E-mail account password From Sender E-mail address key in. For example, gmail: mail1@gmail.com To Receiver E-mail address key in. For example, gmail: mail2@gmail.
8.6 Log Search Log type Set conditions for searching: type and time range. Log type can be ALL, Alarm, Operation, Motion, Sensor and Video Loss. Start/End time Set the search range (Year/Month/Day). Press [SEARCH] to search.
8.7 Backup Channel Backup all channels or single channel 1-4. Record Type Select all, normal or alarm. Start/End time Select the backup range of time. Press Search to start searching. The record list will be shown if available and follow [Record list] to backup. Storage Device Choose: USB Disk, DVD Recorder, USB DVD Recorder.
8.8 System Time Setup HDD Display System Information Password Language Audio System Maintenance 8.8.1 8.8.2 Time Setting Date/Time Select by using virtual keyboard. Date Format Setup Set: YY/MM/DD, MM/DD/YY. Time Format Setup Set: 24Hours, 12Hours. Time Zone Setup Time Zone setting of DVR.
Format Format the selected HDD Format HDD Overwrite Enable/Disable Overwrite, Values: On/Off. If Overwrite is enabled, the period can be set as 6, 12, 24, 36, 48, 72 hours and 7, 15, 30, 60 days. Pack Time Set the required packing time frame to allow the system to pack each saving file under continue recording mode. Pack time setting: 5 min, 10min, 15min, 20min, 30min, and 60min. HDD Error Buzzer Enable When the hard drive does not have enough space or something wrong, set the buzzer on.
8.8.3 Display Setting GUI Display GUI display mode can be VIDEO or VGA. Video Switching Time Set the switching time when switching channels in video mode. Values: 1-99 seconds. (0 sec is Off) VGA Switching Time Set the switching time when switching channels in VGA mode. Values: 1-99 seconds. (0 sec is Off) Switching Sequence Set the switching sequence of channels. Video Margin Set the display margins of the screen. They are Left, Right, Top and Bottom with range between 0 - 36.
8.8.4 System Information Provide the firmware version, MAC address, HDD status…. 8.8.5 User Password Password Setup Enable/Disable password checking. Values: On/Off (Default) Administrator account/password can not be blank. And at least 4 characters for the password. Administrator account/password Administrator account allows user to access all of functions. User account/password Access rights can be assigned by setting. Remote ID setup Can adjust remote control ID to control multiple DVR.
8.8.6 8.8.7 8.8.8 System Language Language Values: Traditional Chinese and English. Auto rebooting after change. Function Tip Show function tips below the menu items. Value: On/Off (Default). Audio Setting Audio Volume Set the volume of audio In/Out. Values: 1-10. (Default: 5) System Maintenance Auto maintenance: Set time for auto rebooting. Value: On/Off.
F/W update Please plug the USB memory stick into the USB port on the DVR rear panel after download the new firmware to the USB memory stick. Note: the firmware only can be upgraded by using the USB port. Please don’t operate the system, remove the USB memory stick or remove the power while it is in upgrade progressing in order to prevent any serious system error. The system will automatic reboot after upgrade. Load Setup Default Load factory default. Refer to [Default Setting].
9. Cell Phone Monitoring Operation JAVA Script surveillance: 1. The mobile Phone must support JAVA Script 2. To download the JAVA software: open Internet Browser on the mobile phone, and enter the IP address of the DVR and add /viewer.jar at the end. Example: http://xx.xxx.xxx/viewer.jar. 3. Execute the application 4. Click on “Add” on the drop down menu to add an IP address. 5. Enter the IP address, user name 6.
■ Android Software install/setup procedure Before the installation, please check the ”Allow Non-market application” or “unknown source” checkbox in your mobile phone< PIC 1~2>. < PIC 2> First method 1. First, please make sure the PC synchronize software had installed and activated in your Android mobile phone. And connect your android phone to PC via USB. 2. Install “Castillo player” software player to the Android phone through your synchronize software.
Method two You may copy the APK installation package to your mobile phone or memory card, and then install it through other software. 1. Copy the “Castillo player” software package to your mobile phone through USB or directly to SD memory card. 2. Download the free APK installation software from Market, for example APKinstallerc or AppInstaller, here we use AppInstaller for example. 3.
5. Press the “Setup” button to setup the connection setting . Enter your individual configuration. 6. After setting complete, enter a name you prefer then click the “Add to my favorite” checkbox to save the setting. 7. Press “Connect” button, it’ll connect to the DVR according to your setup, and you may see the DVR picture after the connection established.
8.
■ iPhone software install/setup procedure 1. Download the “Castillo player” in AppStore then install it to your IPhone. 2. Run the “Castillo Player” after installation. Press “setup” button to setup the connection setting. Enter your individual configuration then press “back” button to go back to the main screen.
3. Press “Play” button, then you may see the DVR live view picture after the connection established . 4.
■ Symbian Software install/setup procedure 1. Copy the Symbian player to your mobile phone or memory card; you may see the example below in the case of NOKIA. 2. Connect the mobile phone to PC via USB, copy the live view software to the memory card of your mobile phone .
3. Before the installation, please make sure you had cancel the “Only Signed Application”, also cancel the “Connection credentials check” . 4. Enter the folder which you’d saved the live view software “fuho_20110221.sisx”, double click to install, follow the instruction to proceed .
5. After the installation, enter the “Installed Application” and you may see the “Castillo Player” inside .
6. Click and run the Castillo Player program . 7. Press the “Setup” button to setup the connection setting. After setting complete, click the “Add to my favorite” button to save the setting. Press “Connect” button, it’ll connect to the DVR according to your setup .
8.
■ Windows Mobile Software install/setup procedure 1. Please install “Microsoft ActiveSync” into the PC before installing CAB software. 2. Execute the Microsoft ActiveSync program in your PC first, and connect the Windows Mobile SmartPhone to PC via USB, then it’ll synchronize the SmartPhone and PC. 3. In ActiveSync program, Click “Browse” button to open the mobile device folder . 4. Copy the .
7. Double click and it’ll begin the installation, follow the instruction for setting up. After the installation, you may find the “Castillo Player” in your program . 8. Run the Castillo Player program, press the “Setup” button to setup the connection setting. After setting complete, enter a name you prefer then click the “Add to my favorite” checkbox to save the setting. Press OK and Leave to go back to the main screen .
9. Press “Connect” button, it’ll connect to the DVR according to your setup, and you may see the DVR picture after the connection established . 10.
1. Blackberry Software Connect Procedure Blackberry RTSP Connect procedure: Verify Authentication, website address input format as below rtsp://(website address)/ch(channel number)?user=(user ID)&pwd=(user password) e.g. rtsp://f16.cctvdvr.com.tw:554/ch2?user=2222&pwd=2222 2.
10. H264 Player Operation Preface H264 Player software allows to playback the backup saving file from the DVR. System Requirement Operating System: Windows 2000, XP, Vista, Windows 7. Program obtainment and installation While user start to backup the file from DVR, the system will automatically copy the H264Player.exe file and recorded data to the backup device for example, an USB flash memory stick.
User Interface Open File Click Pause Click Stop Click Play 1x Click Fast Forward Click Slow Forward Click Capture the image (snap shot) to the host computer Click Volume Control Drag Rewind Click Step Forward Click Mark start time Click Mark end time Click Backup Click Right click the mouse to open the Pop-up Menu pop-up menu including Setting, Language, About H264Player, Exit 44
11. Web Operation Preface The Web Application Manager allows the user to remotely monitoring, playback, and backup through the DVR. System Requirement Operating System: Windows 2000, XP, Vista, Windows 7 Web Browser: Internet Explorer Add-on Installation Please use the IE browser to login the IP address of DVR setting. If the user is the first time to login the page, the system will ask the user to download and install the add-on as you can see the page below.
Live mode Start/Stop the Live Monitoring Record the Footage to Computer Snapshot the Image Enable/Disable Audio Click Click Start recording or (saving path: Setup/Information) to snap shot the image (saving path: Click Setup/Information) Click under the live viewing mode to enable the audio, and click Volume Control Switch Channel Display Single/4 Display Stop recording to disable Click Double click the channel to enter single channel display, double click again to return.
Playback (1) Select Date Event Search or (2)Click (3)Click Playback Click on pop up file list Fast Forward Click “Fast Forward” (Speed: 2X, 4X, 8X, 16X) Rewind Click “ Rewind” (Speed: 1/2, 1/ 4X, 1/ 8X, 1/ 16X) Step Forward Click “Previous”or “Step” Snapshot Click Mark start time Click Mark end time Click Backup Click Backup to capture.
DVR Setting Cameras Please refer “Camera Setup” for more information Record Please refer “Record Setup” for more information.
Please refer “Alarm Setup” for more information. MotionDetection Please refer “Motion Detection” for more information.
Log search System Setting Date/Time Setting HDD Management 50
Display System Information Account/password 51
Audio Setting System Maintenance Host setting 52
12.
13. HDD Support List Suggest to install the Hard Driver listed below to make sure the compatibility. Brand Model Number Capacity ST3250310CS 250G ST3320410SV 320G ST3500418AS 500G ST3500312CS 500G ST3750528AS 750G ST31000424CS 1T ST31500541AS 1.
14. USB Flash Memory Stick Support List The following recommended flash drives have passed all testing procedures and are safe to a: backup, b: Playback by PC, and c: update firmware.
15. Operation System For Mobile Phone Application O/S Version Android 2.1、2.2、2.3 iPhone 3.x、4.x Castillo player WinMobile 6.5.x CastilloPlayer_5.0.3.CAB Symbian S60 v3 above CastilloPlayer_5.1.713.sisx BlackBerry 16. Mobile Phone Software CastilloPlayer(Android_1.5~2.1).apk CastilloPlayer(Android_2.2~2.3).apk Support RTSP None Protocol 3G Data Rate Data Transfer Speed (bps) Brand Huawei ZTE Model WCDMA (3G) 2Mbps ~ 386kbps HSDPA (WCDMA 3.5G) HSUPA (WCDMA 3.
