User manual

26
PLAY BACK RECORD DATA
There are two ways to playback the record data.
1. Playback by Time:
Press the “Play” button, the screen will display playback menu, you can use
up/down/right/left/enter buttons to select the start day and time which you want to
play back, then move to “PLAY” and press “Enter” button to playback.
2. Playback by Event:
4.1 Press “Play” button, you can select the PLAY BY EVENT from playback menu.
Use up/down/right/left buttons to select event which you want to play back, then
press “Enter” button to playback.
4.2 Press “Menu” button into menu list and select Event list, use
up/down/right/left/enter buttons to select event which you want to play back,
then press “Enter” button to playback.
In the play mode you can use play bar to control play function. The play bar buttons
introduction as below:
FF: fast forward.
Press the “FF’ once the playback speed will change to x2 speed to play, press again
it will change to x4 and press again it will change x8, if you want to return to the
playback speed just press the “Play” button.
FB: fast backward playback.
Press the “FB’ once the backward speed will change to x2 speed to backward play,
press again it will change to x4 and press again it will change x8, if you want to
return to the playback speed just press the “Play” button.
P/S: Pause / Stop button
Pause: Pause the playback. (Press P/S button one time.)
Stop: Stop playback and go back to the view mode. (Press P/S button for longer
time)
PLAYBACK：
1.TIME: 2006/12/26 12:26 PLAY
2. EVENT: LIST
HDD FILE
BEGIN 06/12/26 08:26
END 06/12/26 16:20