User manual

23
* Device: GPS / DIAL
* Baudrate: 2400 / 4800 / 9600 / 14400 / 19200 / 38400 / 57600 / 115200
* Dial mode: TONE / PULSE
g. DVR ID: for setting DVR ID number.
ID TYPE: ID / BUS / TAXI / TRAIN
h. Factory default: for setting load default yes or no.
When you press Key, the DVR will go back to factory default. The screen
will show “FACTORY DEFAULT OK!”.
i. Update code from CF card:
Please contact your distributor for more information if this DVR got problem.
9. Peripheral Setting Operation
A. Press key to enter menu selection mode.
B. Use / key to select [PERIPHERAL SETUP] setting section.
C. Press key to enter [PERIPHERAL SETUP] select mode.
a. Buzzer: for setting buzzer alarm time for video loss, motion is detect, I/O alarm
detect and key move alarm.
 Beep Time: 01 ~ 10
D. Use
/ key to select section for setting and use / key to select
DVR ID
ID TYPE:
ID
ID: 0000
PERIPHERAL SETUP
BUZZER：
VIDEO LOSS：
：：
：ON (or OFF)
MOTION：ON (or OFF)
ALARM IN：ON (or OFF)
KEY MOVE：ON (or OFF)
BEEP TIME：01