User manual

20
c. Alarm / Motion Record: for set-up 4 level record quality, 10 kinds frame rate and
duration for record while detect alarm or motion.
* Resolution: 0.25CIF / CIF / 2CIF
* Quality: Standard / Super / High / Normal.
* REC Time: 10~99 (seconds)
* REC Rate: Set up frame per second (fps) as below
NTSC: 30 / 15 / 8 / 4 (fps)
PAL: 25 / 12 / 8 / 4 (fps)
* Sensitivity: 01 ~ 10 (10 = the highest)
d. HDD information: for show CF Card information.
* If you choose [CIRCULAR: ON], the recording will continue and overwrite
previous recording when all CF card capacity is full. If you choose [CIRCULAR:
OFF], the recording session stops when all CF card capacity is full.
* If you select “HDD format”, the CF card will be erased all data recording.
* It shows the size of the CF card installed in the DVR.
e. USB Slave for back-Up: This function is not available for use CF card model and
USB download port is not built-in.
f. Pre-record setup: for turn pre-record function On or Off.
ALARM/MOTION RECORD
RESOLUTION: CIF
QUALITY: STANDARD
REC TIME: 60
REC RATE: 30_FPS
SENSITIVITY: 04
HDD INFORMATION
CIRCULAR：
：：
：ON
HDD FORMAT
HDD CAPACITY
USB SLAVE
PRE-RECORD
PRE-RECORD：
：：
：ON
REC RATE: 4_FPS