User manual

18
AUTO SEQUENCE
CH01: ON
CH02: ON
CH03: ON
CH04: ON
TIME INTERVAL: 5.0
6. Auto Sequence Setting
A. Press key to enter menu selection mode.
B. Use / key to select [AUTO SEQUENCE] setting section.
C. Press key to enter [AUTO SEQUENCE] select mode.
B. Use / key to select channel for auto sequence view.
C. Use / key to turn On for view or turn Off for not viewing.
F. Press / key to select view each channel time.
G. Use / key to select the time to view each channel (0.25 / 0.5 / 0.75 / 1.0 /
1.25 / 1.5 / 1.75 / 2.0 / 2.25 / 2.5 / 2.75 / 3.0 / …… / 10.0).
H. Press key to exit for select other OSD setting to set or press key and
keep more than 2 seconds to exit OSD setting operation.
7. Record Setup Operation
A. Press key to enter menu selection mode.
B. Use / key to select [RECORD SETUP] setting section.
C. Press Key to enter [RECORD SETUP] select mode.
D. Use
/ to select section for setting.
RECORD SETUP:
RECORD MODE
CONTINUOUS
ALARM/MOTION
HDD INFO
PRE-RECORD