User manual

The DVR system is preset to work in Mode 2. If you want to change it to Mode 1, please

switch the select switch to Mode 1. (The select switch is at the back of DVR.)

When the DVR system is power ON and on record mode,

1. Press FF key two times, FB key two times and (Select) key two times. Then,

the following screen will be showed. If there are 2 channels or 1 channel selected,

then the other cameras setting under MENU will not function.

2. Use / key to select 4CH/2CH/1CH for setting.

3. Press key to exit.

a. Select Channel Mode: 4CH/2CH/1CH for select

b. Select Playback Mode: 4CH/1CH for select

Screen Instruction:

[PANIC]: Press panic button and recording the event

[LOSS1234]: Camera loss will be found on the 1234.

[ACH1]: Audio in channel 1

[ACH2]: Audio in channel 2

[REC]: Recording

[LIV]: View mode (Without recording)

[BOT]: The DVR system is booting.

[PB]: Playback mode

4CH: 4 channels mode

[C]: Continuous recording

PANIC LOSS1234

ACH1 CH01

[REC] 4CH [C][R] 99% 2006/01/01 18:08:08

SELECT CHANNEL MODE

SELECT CHANNEL MODE: 1CH

SELECT PLAYBACK MODE: 1CH