User manual

9
BEFORE OPERATION
(1) The system will auto detecting the hardware and enter Recording mode while
hardware is in normal condition.
(2) The system will show [UNKNOW HDD] then enter [Format Menu] within 3 seconds
when first time start the system or CF card is changed. Please select [FORMAT
HDD YES] to format CF card. The system will auto enter record mode after format
CF card. (Or, enter the Main menu “record setup” and select HDD information to
format the CF card.)
(3) If the system not setting time yet, will auto enter to time setting screen, please press
[MENU](ESC) key to exit after setting time.
(4) If [NO HD] signal show on screen, please turn off the power then check CF card is
exist or not. If yes, please turn the power on again.
(5) If screen show [NO VIDEO], please check video input connector whether is
connecting with camera correctly.
(6) Suggest turn on camera power before turn the system power on.