User manual

User Manual for Mobile DVR

6 Syestem Upgrade User Guideline

6.4 MU-MINI-RFS.crc（Record File System）Upgrade

1. Cope files into SD card. Make sure files were copied totally

2. Insert SD card into device before power on

3. Power on the device and all indicator except SD1 and SD2 will be light.

4. “LOADING” and “ERASING FLASH”showed on window, mainwhile PWR light one and CH1 indicator on

front pannel flicking, it means upgrading.

5. Progress bar will be showed on the window (1%--100%). When the bar is full, it means upgrade complete.

Remark: After upgrade, the file in SD card will be deleted automatically.

6.5 MU-MINI-APP.crc（Application Program）Upgrade

1. Process same as above.

Remark: After upgrade, a new debugger information file will appear automatically in SD card.

6.6 MCU Upgrade

1. Process same as above.When MCU upgrade, SD1 indicator will be light..

2.“UPGREAD MCU”and “REBOOT！”will show in turn..

3. Device will restart automatically when upgrade complete.

6.4. Upgrade Check out

Go back to monitor window after upgrade, and then press “INFO’ on remote control or go to ‘System info”

interface to check out upgraded version.

Note:

1) Make sure stop any operation during upgrading.

2) Make sure the file which need to be upgraded has been saved into SD card and device must be in “power

off” statues before upgrade.

3) Upgrade step by step. The correct sequence is Record File SystemApplication ProgramMCU.

4) Device will restart automatically when upgrade complete.

RECODA