User manual

User Manual for Mobile DVR
20
G
G
-
-
SENSOR
SENSOR
REAL LIMIT VALUES
X: 2.00g
Y: 2.00g
Z: 2.00g
ALARM: CLOSE/OPEN
ADJUST
X= -0.00 Y= -0.00 Z= -0.00
SAVE
THRESHOLD VALUES
“LIMIT”: Limit value for X/Y/Z, Minimum value is 0.00g and Maximum value is 9.99g, press digit keys to
setup.
“ALARM”: G-Sensor alarm OPEN/CLOSE setup, press 【ENTER】to set it.
 Alarm Open: Open alarm recording and alarm files will be recorded when X/Y/Z value over than “Limit
value” under record stautes
 Alarm Close: Close alarm recording and alarm files will not be recorded when X/Y/Z value over than
“Limit value” under record stautes
“CHECK”: Adjust X/Y/Z current values when user start up device at first time, Press the【ENTER】key to
confirm. After “CHECK”, X/Y/Z value will be “0”
Remark: Please do remember to click “SAVE” to save data after setting.
4.7.7 Security Settings
SECURITY
SECURITY
PASSWORD： ON/OFF
USER PWD： ******
CONF PWD: ******
INPUT NOT SAME！
ADMIN PWD： ******
CONFIRM : ******
SAVE
NOTICE：PASSWORD IS 6 NUMBERS！
RECODA