User manual

User Manual for Mobile DVR
18
4.7.6 Alarm Settings
ALARM SETUP
ALARM SETUP
INPUT
ENABLE RECORDPWL
ON
ON
ON
OFF
ALARM
LEFT
RIGHT
BRAKE
HIGH
HIGH
LOW
LOW
ON
OFF
ON
OFF
OUTPUT1
OUTPUT2
OUTPUT
ON
OFF
ENABLE PWL
HIGH
LOW
SAVE G-SENSORMOVE DETECT SPEED
 Alarm input
Support 4ch alarm input.
"ENABLE": switch on/off.
ON---Enable alarm input;
OFF---Disable alarm input. Press the 【ENTER】 key to select on or off to enable or disable
alarm input.
"Level Setting ": Setup input alarm level signal. HIGH---high electrical level input signal will enable alarm.
Press ‘enter’ to set the level. High or low level can be set with input signal; open or close can be set with output
signal.
"RECORD": ON---Enable alarm recording; OFF---Disable alarm recording. Press the【ENTER】to select on or
off to enable or disable recording.
 Alarm output
Support 2ch alarm outputs.
“ENABLE”: On/Off switch.
ON---Enable alarm output;
OFF---Disable alarm output. Press the 【ENTER】 key to select.
PWL: power level output for alarm. High stands for high power level output and low refers to low power level
output. Select and press “SAVE” to save all setup.
 MOVE DETECT
RECODA