User manual

User Manual for Mobile DVR
20
setup.
“ALARM”: G-Sensor alarm OPEN/CLOSE setup, press 【ENTER】to set it.
 Alarm Open: Open alarm recording and alarm files will be recorded when X/Y/Z value over than “Limit
value” under record statues
 Alarm Close: Close alarm recording and alarm files will not be recorded when X/Y/Z value over than
“Limit value” under record statues
“CHECK”: Adjust X/Y/Z current values when user start up device at first time, Press the【ENTER】key to
confirm. After “CHECK”, X/Y/Z value will be “0”
Remark: Please do remember to click “SAVE” to save data after setting.
4.4.5. Security Settings
SECURITY
SECURITY
PASSWORD： ON/OFF
USER PWD： ******
CONF PWD: ******
INPUT NOT SAME！
ADMIN PWD： ******
CONFIRM : ******
SAVE
NOTICE：PASSWORD IS 6 DIGITAL！
Password setting:
"PASSWORD": ON---Enable password; OFF---Disable password, press the【ENTER】 key to select.
Select and press “SAVE” to save the configuration. Administrator Password should be same as User’s.
Attention: Multi device have AC recording at the same time, please separate name the device and use different
password. The Device ID can be set in the menu of basic setting.
4.4.6. Network Settings:
Network parameters should be set on the device. The system will detect devices without any further setting if