User manual

User Manual for Mobile DVR

ON---Enable alarm output;

OFF---Disable alarm output. Press the 【ENTER】 key to select.

PWL: power level output for alarm. High stands for high power level output and low refers to low power level

output. Select and press “SAVE” to save all setup.

●

MOVE SET (Motion Detection)

MOTION DETECTION

OFF/ON

HIGH/MID/LOW

HIGH/MID/LOWCHI/CH2/CH3/CH4

CHI/CH2/CH3/CH4

AREA

ENABLE

LEVEL

CHANNEL

SETUP

SAVE

Channel Number：CH1/CH2/CH3/CH4，press【ENTER】key input

Level: HIGH/MID/LOW. Press【ENTER】input

ENABLE: ON/OFF. Press【ENTER】input

ENABLE ON: start alarm record and records alarm journal when alarm

ENABLE OFF: Don’t start alarm record and don’t records alarm journal when alarm

AREA SET: Press【ENTER】key to setup

Remark: After complete setup, please press “SAVE” to save all settings

● OVER SPEED

Move cursor to “over speed” and press【ENTER】key to enter to over speed alarm interface as below: