User manual

User Manual for Mobile DVR
14
RECORD SETUP
RECORD SETUP
SYSTEMPAL/NTSC
ALARM DELAY
30301800S
OVER WRITTENON/OFF
RESOLUTIOND1/HD1/CIF
AUDIO ON/OFF
ON/OFF
ON/OFF
25/30
25/30
1
1
1~5
1~5
CH1
CH1
1~4
1~4
RECORD
RECORD
FRAME RATE
FRAME RATE
QUALITY
QUALITY
CHANNEL
CHANNEL
TIME SLICE
15/30/45/60 (M)
SAVESUB-STREAM
BITRATE
D12048 /2000 /1600 /1400
/1200 /1000 / 800 /600HD11500 /1300 /1100
/900 /800 /700 /600 /500CIF1200 /1000 /800
/700/ 600/ 500/ 400 /300
RECORD MODE
AUTO/TIMED/
ALARM/MANUAL
SD FUNCTION
NO REC/MIRR REC/
LOST REC
TIME LIST
"SYSTEM ": Press ENTER key to select PAL or NTSC
"RECORD MODE": AUTO / Timed / Manual, default AC record, press ENTER to select.
"RESOLUTIONS": Press theENTERto select D1, HD1 or CIF, default D1. Please note 4 channels will
be set Synchronously, e.g. if you set “CIF”, the CIF resolution will apply to all channels; However if you set
the resolution as D1, this setting will apply to ch1 and ch2+ CIF will apply to ch3 and ch4. The resolution
doesn’t relate with the below “Channel” “Quality” “Frame Rate””Record” directly. Default 1600KBPS
alterable withENTERor【-】【+】.
"AUDIO ": Audio recording On / Off switch, press theENTERto select.
"AUDIO INPUT": LINE IN / MIC, press theENTERto select.
"TIME SLICE": There are 4 types of time period for continued recording, they are 15/30/45 and 60
minutes. Press theENTERkey to modify this setting.
"CHANNEL", "QUALITY", "FRAME RATE", "RECORD": Those four keys are for the configuration of
every single channel, press theENTERkey to set up.
"OVERWRITTEN": Overwritten on/off switch. Press theENTER key to select.
"ALARM DELAY ": Set alarm delay between 30 seconds ~ 1800 seconds, press digit keys to setup
"GOP": I-frame interval. Press digit keys to set
“BITRATE”: Press digit keys to select. Default 1600kbps, alterable with ENTERor 【-【+】
"TIME LIST": 2 time periods can be set for a day; the DVR will automatically make video records according to
the setting. This function is available only with the timed recording mode. Press theENTERkey to enter
below setting interface.
SD card: cannot recording/ mirror recording/ recording loss, please press ENTER
1) Cannot recording: The device can only recording against HDD, if the HDD is full, the SD card cannot save
the video record.
2) Mirror recording: main stream recording on HDD, sub-stream recording on SD card at the same time
(There are three situations that may lead video record failure: