TwinPeak Solar Panel Fact Sheet

www.recgroup.com
Ref: NE-08-08-03 Rev- C 01.19
REC TWINPEAK TECHNOLOGY
Seing new standards in polycrystalline modules
The range of REC TwinPeak solar modules use a series of
unique and innovative technologies in a ground-breaking
cell layout, to give you a high efficiency and high power
output product based on a polycrystalline platform.
With both 60-cell and 72-cell module sizes available, based
on a design using 120 or 144 laser cut polysilicon cells
respectively, the REC TwinPeak product family combines
four different technologies which together, result in an
extra power output of over 20 Was per module, a class-
leading efficiency of up to 1 7.7% seing new standards for
polycristalline solar modules.
Get more power out of the available space
Packing in the technological advancements shown below
means REC TwinPeak solar modules give you more power
output per square meter than the standard competition.
This means that in areas with limited space, such as
rooops, you can fit in more electricity generation capacity
and make maximum use of all available space.and make
maximum use of the available space.
Puing standard modules in the shade
One major advantage of REC's TwinPeak technology compared
to standard modules, is its ability to generate electricity even
when partially shaded. This helps you to gain more energy yield
over time from your installation.
If a standard module is shaded, its power and the energy produced
will sink drastically and even stop generating electricity
completely if shaded across the module width.
REC TwinPeak solar modules are split into two twin sections
which generate electricity independent to each other, but
combine again before the current exits the module. This helps
provide continuous electricity generation in the non-shaded
section even at times of reduced irradiance on the module,
increasing overall energy yield and installation profitability.
When one half of a standard
module is shaded, none of the
module produces electricity
With the same shading, an REC
TwinPeak module has more surface
area still producing electricity.
Half cut cells
Laser cut polysilicon cells reduce internal
resistance for higher power output, higher
efficiency & increased reliability.
Split junction box
The three parts enable the innovative
new cell layout for a higher energy yield,
while reducing heat & increasing reliability.
Passivated Emier Rear Cell
New generation of cell technology captures
more wavelengths of light through
mirror-like architecture for higher efficiency.
Five bus bars
A shorter distance for electrons to travel
vastly improves the current flow, reducing
resistance in the cell & increasing efficiency.
Reduce installation time and other balance of system
costs
By delivering more power output per square meter, fewer
REC TwinPeak modules are required to achieve the same
power generation capacity. This means quicker
installation times and fewer components such as clamps
and racks – all reducing overall costs.
Lower your energy bills & shorten amortisation time
through increased yield and lower costs
All REC TwinPeak products are certified to IEC 61215,
IEC 61730, and UL 1703. They have also been certified
for: Salt Mist and Ammonia Corrosion Resistance,
Potential Induced Degradation Resistance, Ignitability
Resistance, and now come with a 20-year product
warranty and 25-year power output warranty, with first-
year degradation at only 2.5%.
Even more, REC TwinPeak products now are eligible for
an extra 5 years product warranty extension, when
installed by a certified REC Solar Professional installer.
Speak to your installer about ensuring your modules
qualify and that you benefit from all the advantages of
REC TwinPeak Technology.