Peak Energy Installation Manual
REC Peak Energy Series Installation Manual - UL
Rev K. .
INTRODUCTION
Thank you for choosing REC photovoltaic panels. REC Peak Energy panels are ideal for delivering long-lasting and reliable power output. The panels have
been created through intelligent design and are manufactured to the highest quality and environmental standards. With correct installation and maintenance,
REC panels will provide clean, renewable energy for many years.
Please read this entire manual carefully. It contains critical information on safety, as well as detailed instructions for installation, operation and maintenance
of this panel. Failure to follow the procedures contained within will invalidate the warranty. Review all instructions and safety notes before working on the
system. Failure to do so may lead to injury or damage to property.
HOW TO USE THIS MANUAL
This installation manual describes the installation procedures for the mounting of all REC’s UL certified REC Peak Energy Series solar panels in a
photovoltaic array. Review the entire manual before installing the panels and ensure you are working from the latest version. Throughout the manual, you will
see the below icons which highlight important information or notes:
Indicates potential for damage to the array or property or personal safety.
Indicates important notes on best practice to help with the installation or to avoid potential damage to the panels, array or property.
For further information on installation procedures, please call your distributor or contact your local REC Solar office. Details available at www.recgroup.com.
YOUR RESPONSIBILITY AS AN INSTALLER
Installers are responsible for the safe and effective installation and operation of the photovoltaic system and for adhering to all local and national standards
and regulations. Prior to installation, check all applicable regulations and permits concerning solar systems and ensure all local directives are observed.
• Ensure the REC panels are in a suitable condition for use and appropriate for the particular installation and environment
• Use only parts that convene to the specifications set out in this manual
• Ensure a safe installation of all aspects of the electrical array
All equipment should be properly maintained and inspected prior to use.
SUPPORT
Do not aempt to install when you are unsure of the procedure or suitability. For questions or guidance with your installation, please call your distributor or
contact your REC sales office, which can be found at: www.recgroup.com/en/contacts.
LIABILITY DISCLAIMER
REC SOLAR PTE. LTD. accepts no liability for the usability and functionality of its photovoltaic panels if the instructions in this guide are not followed. Since
compliance with this guide and the conditions and methods of installation, operation, use and maintenance of the panels are not checked or monitored by
REC SOLAR PTE. LTD., REC SOLAR PTE. LTD. accepts no liability for damage arising from improper application or incorrect installation, use, operation
or maintenance. This does not apply to damages due to a panel fault, in cases of loss of life, bodily injury or damage to health or in the event of a grossly
negligent breach of obligations on the part of REC SOLAR PTE. LTD. and/or in the event of an intentional or grossly negligent breach of obligations by a legal
representative or vicarious agent.