Safety data sheet

SAFETY DATA SHEET (SDS)
according to EU Regulations No. 1907/2006 (REACH), No. 2015/830, No. 1272/2008 (CLP)
and EU Commission Resolution No. 453/2010
ABS 3D Printer Filament, TU 20.60.13−002–11757806−2017
CN code 3916 90 900 0
Date of issue: October 24, 2017
1
1.
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPA-
NY/ENTERPRISE
1.1.
Product information
Trade name:
ABS 3D Printer Filament (Acrylonitrile Butadiene Styrene)
Chemical name (according to
IUPAC):
None
Synonyms:
ABS monofilament, plastic monofilament
CAS No.:
None
EC No.:
None
Registration No. (REACH):
Unlisted
1.2.
Appropriate methods of use of the substance/mixture as intended and non-recommended methods of use
Product use:
The filament is intended for use as an expendable for creating 3D objects by apply-
ing successive layers that recreate the outlines of a digital model using the Fused
Deposition Modeling (FDM)
Non-recommended methods
of use:
When using the filament, the temperature must be within the range of 130 to 280 ºС.
If the filament has been transported or stored at the temperature below 10 °С, it
must be kept in production premises at a temperature of at least 18 °С within 8
hours or more.
At a temperature above 35 °С the color of the filament can change while the quality
of the product deteriorates (deviation)
1.3.
SDS supplier information
Manufacturer:
REC LLC
9 Godovikova str., build. 1, entr. 1.19, prem. 2.3, room 2.3.1, Moscow city, 129085,
Russian Federation
Tel.:
[phone]
E-mail:
[e-mail]
1.4
Emergency tel.:
Emergency contact infor-
mation:
112 (Russia, EU),
112 and 911 (USA, Canada)
Other information:
www.rec3d.ru
2.
SECTION 2: HAZARDS IDENTIFICATION
2.1.
Classification of substance or mixture
According to CLP Regulation
and GHS Regulation
No. 1272/2008:
The product is not classified as dangerous.
The dangerous effect of the filament can be caused only by the possible release of
polymer dust during transport, storage or use
2.2.
Label elements
Signal word:
None
Hazard symbols:
None needed
Hazard statements:
None needed
Precautions:
None needed
2.3.
Other hazards:
Flammable, non-explosive. Polymer dust irritates the mucous of eyes and upper res-
piratory tract, adversely affects the central nervous and respiratory systems, liver,
kidneys, blood
3.
SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS
Chemical name, formula
CAS No.
EC No.
Weight fraction, %
Polymer of prop-2-ennitrile with buta-1,3-diene
and ethenyl-benzen, [[C
3
H
3
N]
k
[C
4
H
6
]
m
[C
8
H
8
]
n
]
x
9003-56-9
none
up to 100.0
4.
SECTION 4: FIRST AID MEASURES
4.1.
First aid measures
General advice:
Maintain strict personal hygiene when using the filament; avoid inhalation of aerosols
and eye contact. At a temperature above 150
о
С, the release of thermal destruction