Installation & Assembly

Page 2
MADE IN CHINA
Printed in China
Step 3.
To assemble the top section, attach top long frame (P)
and top short frame (Q) together using two hex screws
(T). Insert four wooden pegs (X) into peg holes in top
frames (P & Q). Insert assembled top section to top
vertical supports using eight hex screws (T). Insert
hanging bar brackets (R) into top frame assembly. Install
hanging bar (S) using two hanging bar hex screws (V).
Tighten all hex screws using hex wrench (W).
P
S
R
V
T
T
X
X
X
X
T
T
T
T
T
T
V
R
Q
Step 4.
(Optional cover sold separately)
To assemble the optional cover, open the front and
work the cover up over the top of the assembled
frame. Align the frame corners to the inside seams of
the cover. Work the cover sides down to the base.
Using the ties inside the cover, tie to the
frame or shelves at the locations closest to the ties.
Assemble the two piece cover bar together and
insert into the bottom of the cover door. To leave the
door open roll it up and tie it in the open position.
Untie and let the door unroll for the closed position.
The weight of the bar will keep the door closed.
Part
N
O
P
Q
R
S
T
U
V
W
X
Part
A
B
C
D
E
F
G
H
I
J
K
L
M
Wood Wardrobe
NEED HELP? For help with assembly, or if you are missing a part,
please call or email us.