Assembly Instructions

STEP 9

1. Attach the top board (1) to the pre-assembled both side panel (2),(3) ,cross car (4) and rear cross

bar (10) by inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes

on the both side panel (2),(3) ,cross car (4) and rear cross bar (10).

2. Insert 4 cam locks (B) into cam lock holes on the both side panel (2),(3) separately then rotate

clockwise to secure cam bolts in place by using a Philips screwdiver.

STEP 10

1. Insert 4 plastic shelf holders (F) into the holes on the positions that you desire for the shelf.

2. Put the shelf (8) onto the plastic shelf holder (F).

3. Place the drawing with hole position on the wall that you desire to fix the cabinet.

4. Drill 2 holes on the wall.

5. Insert 2 plastic anchors (P) into the holes on the wall.

6. Attach the cabinet in place w/holes, then insert 2 long screws (N) through the holes on the rear

cross bar (10) then tighten the cabinet to the wall.