Assembly Instructions

STEP 7

1. Insert 4 wood dowels (C) into dowel holes on the cross bar (4) and rear cross bar (10).

2. Attach the door (5) to the middle panel (6) and bottom board (7) by inserting door pins (G) into the

holes on the middle panel (6) and bottom board (7).

STEP 8

1. Attach the right side panel (3) to the cross bar (4), middle panel (6), bottom board (7) and rear

cross bar (10) by inserting cam bolts into cam lock holes and inserting wood dowels into dowel

holes on the cross bar (4), middle panel (6), bottom board (7) and rear cross bar (10).

2. Insert 4 cam locks (B) into cam lock holes on the middle panel (6) and bottom board (7)

separately then rotate clockwise to secure cam bolts in place by using a Philips screwdiver.