Assembly Instructions

STEP 5

1. Attach the cross bar (4), middle panel (6), bottom board (7) and rear cross bar (10) to the left side

panel (2) by inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes

on the cross bar (4), middle panel (6), bottom board (7) and rear cross bar (10).

2. Insert 4 cam locks (B) into cam lock holes on the middle panel (6) and bottom board (7)

separately then rotate clockwise to secure cam bolts in place by using a Philips screwdiver.

STEP 6

1. Slide in the back board (9) to the grooves on left side panel (2), middle panel (6) and bottom

board (7).