Assembly Instructions

STEP 3

1. Screw 4 cam bolts (A) into the pre-threaded holes on the right side panel (3) by using a

Philips screwdriver.

2. Insert 8 wood dowels (C) into the dowel holes on the right side panel (3).

STEP 4

1. Insert 1 screw (K) through the hole on the magnet plate (J) then tighten to the door (5) by

using a Philips screwdriver,

2. Attach knob (D) to the door (5), insert 1 screw (E) through hole

on the door (5) then

tighten to knob (D) by using a Philips screwdriver.

3. Insert 2 door pins (G) into the holes on each end of the door (5).