Assembly Instructions

STEP 1

1. Screw 4 cam bolts (A) into the pre-threaded holes on the top board (1) by using a Philips

screwdriver.

2. Insert 6 wood dowels (C) into the dowel holes on the top board (1).

STEP 2

1. Screw 4 cam bolts (A) into the pre-threaded holes on the left side panel (2) by using a

Philips screwdriver.

2. Insert 8 wood dowels (C) into the dowel holes on the left side panel (2).

3. Attach the magnet (H) to the left side panel (2).

4. Insert 2 screws (M) through holes on magnet (H) then tighten to left side panel (2) by

using a Philips screwdriver.