Assembly Instructions

STEP 3
STEP 3
1. Screw 4 cam bolts (A) into pre-threaded holes on right side panel (3).
2. Insert 8 wood dowels (C) into dowel holes on right side panel (3).
STEP 4
STEP 4
1. Insert 1 screw (K) through hole on magnet plate (J) and tighten to door (5).
2. Attach knob (D) to door (5) by inserting 1 screw (E) through hole on door (5) and
tighten to knob (D).
3. Insert 2 door pins (G) into holes on each end of door (5).