Assembly Instructions

STEP 1

1. Screw 4 cam bolts (A) into the pre-threaded holes on the top board (1) by using a Philips

Screwdriver.

2. Insert 2 wood dowels (C) into the dowel holes on the top board (1).

3. Attach the Magnet (E) to the top board by insert 2 screws (K) through holes on magnet (E) then

tighten to top board (1) by using a philps screwdriver.

STEP 2

1. Screw 3 cam bolts (A) into the pre-threaded holes on the left side panel (2) by using a philips

screwdriver.

2. Insert 7 wood dowels (C) into the dowel holes on the left side panel (2).

3. Attach 2 metal hinges (D) to left side panel (2) by insert 6 wood screws (J) through the holes on

the metal hinges and tighten to left side panel (2).