Assembly Instructions

STEP 11

1. Attach left door (5) to left side panel (2) by insert 4 screws (J) through the holes on the hinge (D)

then tighten to the left door (5).

2. Repeat above step to assemble the right door (4).

STEP 12

1. Place the drawing with hole position on the wall that you desire to hang the Cabinet.

2. Drill 2 holes through the hole position on the drawing.

3. Insert 2 plastic anchors (O) into the holes.

4. Attach the cabinet in place w/holes, then insert 2 screws (N) through the holes on the back of

cabinet then tighten the cabinet to the wall.