Assembly Instructions

STEP 9

1. Insert 4 cam locks (B) into the cam lock holes on the left and right side panel (2) (3), make sure it forwards

correctly.

2. Attach top board (1) to assembled unit by insert wood dowels (C) into dowel holes and insert cam bolts (A)

into cam lock holes on left and right side panel (2) (3).

3. Rotate cam locks (B) clockwise to secure 4 cam bolts (A) in place.

STEP 10

1. Attach upper back board (11) and middle back board (12) to assembled cabinet by insert 24

screws (M) through the holes on upper back board (11) and middle back board (12) then tighten

to the back of cabinet by a Philips screwdriver.