Owner Manual

ASSEMBLY INSTRUCTIONS

STEP 3: INSTALLING BOTTOM SHELF

Place SHELF (C) on its side and slide the

(4) BOTTOM POLES (A) through the

holes in the SHELF (C). Make sure that

the SHELF (C) corner cylinders are

positioned over the SLIP SLEEVES (D).

Stand the unit upright.

C (1)

STEP 4: INSTALLING SHELVES

On POLE (A), place 1 pair of SLIP SLEEVES (E) at the

desired distance between SHELVES (C). Please make

sure the arrow faces up and that the word “TOP” is right

side up. Do this for each POLE (A), and make sure that

the heights are identical for each POLE (A).

Lower SHELF (C) over the BOTTOM POLES (A) so that

the corner cylinders of the SHELF (C) are positioned

over the SLIP SLEEVES (D).

Repeat Step 4 to install other SHELVES (C) as desired.

**Use a rubber mallet, if needed, to secure the

SHELVES (C).

D (8) C (1)

**Use a rubber mallet, if needed, to

secure the SHELF (C).

*Note: The level side of the SHELF (C) is

the TOP side (the logo on the corner

cylinders should be right-side up.)