Owner Manual

You will need no additional tools for assembly.
PARTS LIST
A
B
SHELF (4)
C
D
1
SLIP SLEEVE (32)
Please inspect box contents to ensure you have received all components.
Note: The black circular plastic tops in between the Shelves are used only for packaging
purposes. They are NOT NEEDED. Please discard.
CAUTION: Failure to follow these guidelines may result in property damage or personal injury.
Each Shelf holds up to 800 lb with equal weight distribution on Feet Levelers (without Casters).
Each Shelf holds up to 200 lb with equal weight distribution on locked Casters.
E
BACKSTAND (4)
F
G
CASTER (w/wrench)
(2 locking, 2 non-locking)
For mobile option
FEET LEVELER (4)
For stationary option
TOP POLE (4)
End Cap (4) and
Pole Connector (4)
are pre-installed
BOTTOM POLE (4)
Threaded Insert (4)
is pre-installed
Your 4-Tier Wire Shelving Rack w/Wheels should include the following parts. Please inspect
box contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact
our Customer Service. Parts can also be requested online at our website.