Assembly Instructions

STEP 9

1. Place Shelf(8) in position as shown above to prepare to attach to both upper support boards(11),(12).
2. Insert 2 screws (I) through holes in the shelf (8) then tighten to the Left upper support board(12) and Right
upper support board(11) by using a Philips screwdriver.
3. Insert 2 wood dowels(C) into the dowel holes on the Shelf(8).
STEP 10
1. Insert 2pc of the wood dowels(C) into the dowel holes in the two Shelf(16) parts.
2. Attached 2pc of the Shelf(16) to the Left upper side panel(14) by inserting 2pc wood dowels(C) into the dowel
holes in the Left upper side panel(14) and inserting Wood screw(I) through the holes on the Left upper side
panel (14) then tighten to the Shelf(16) using a Philips head screwdriver.